Theoretical investigation of HTS compact microstrip antennas printed on anisotropic substrates using hybrid cavity model

2024-10-1

Performance optimization of a neon turboexpander based on the Kriging model and genetic algorithm

2024-10-1

Absorption of liquid nitrogen into porous materials used in the cryogenic cold chain

2024-9-1

Single-coated thick superconducting films for metal–organic deposition using trifluoroacetates

2024-9-1

Delamination analysis of the epoxy impregnated REBCO racetrack coil under thermal stress based on a 3D model

2024-9-1

Liquefaction and filling of liquid methane and oxygen bipropellant in a common bulkhead tank equipped with a zero boil-off system

2024-9-1

Diffusive solubility of nitrogen in Propane: Measurement from 96 K to 227 K at 0.1 MPa

2024-9-1

Enhancing dynamic stability of HTS maglev systems with preloading method

2024-9-1

Numerical analysis on dynamic evolution characteristics of cryogenic cavitation through a Venturi tube

2024-9-1

Evaporation characteristics of single free-falling liquefied natural gas droplet under different ambient conditions based on the VOF method

2024-8-22

Modeling of cryogenic heated-tube flow boiling experiments of hydrogen and helium with the generalized fluid system simulation program

2024-8-16

Review of the design and optimization of BOG re-liquefaction process for LNG carriers

2024-8-12

Thermal Expansion calculation using FBGS in Cryogenic applications

2024-8-6

Enhancing the cryogenic performance of superconducting magnet encapsulation resins with hyperbranched polymers: A molecular dynamics simulation and experimental study

2024-8-5

Thermal propagation analysis of 2G HTS stacked wires based on a dimensional coupling method

2024-8-5

Genetic algorithm based optimization of nozzle profiles for a hydrogen turbo-expander

2024-8-3

Investigating Taconis oscillations in a U-shaped tube with hydrogen and helium

2024-8-1

Measurement of thermal contact resistance and the design of thermal contacts at cryogenic temperatures

2024-8-1

Crossed fields magnetization of YBCO single-grain bulk superconductors

2024-8-1

Tough epoxy resin systems for cryogenic applications

2024-8-1

Numerical and experimental investigation of 12 W/60 K high-efficiency coaxial pulse tube cryocooler

2024-8-1

Fault diagnosis of new type screw compressor of helium liquefier by vibration signal

2024-8-1

Experimental study and infrared detector application research of micro miniature refrigerators

2024-8-1

LNG density measurement by gravimetric method

2024-8-1

Highly sensitive one-dimensional Dielectric-Superconductor photonic crystal structure for low temperature sensing applications

2024-8-1

Towards scalable cryogenic quantum dot biasing using memristor-based DC sources

2024-7-29

Design, construction and testing of the prototype cryogenic circulation centrifugal pump for the high energy photon source

2024-7-26

Characterizing 1550 nm optical components down to 8 K

2024-7-18

An experimental and numerical framework to assess the temperature distribution in complex He II-cooled magnet geometries

2024-7-1

Study on the high-frequency conversion characteristics of quench and recovery states under thermal modulation of a superconducting flux transformation amplifier

2024-7-1

Loss of pre-stress in impregnated superconducting magnets, experimental results and numerical analysis

2024-7-1

Characterization of residual-resistance-ratio of Cu stabilizer in commercial REBCO tapes

2024-7-1

Experimental study on the dynamics of a liquid nitrogen droplet impacting a surface under Leidenfrost conditions

2024-7-1

Design of Direct-drive Permanent Magnet Synchronous Motor for Cryogenic Valve

2024-7-1

Studies on temperature dependent dielectric properties of some insulators down to Liquid Helium temperatures

2024-7-1

Essential properties of sub-cooled water ice and background field properties of MgB2 coil measured in it

2024-7-1

Parameters of the cryogenic mechanical thermal switch with temperature range 15–300 K for magnetic refrigerators

2024-7-1

Experimental study on vibration reduction of a cryogen-free dilution refrigerator system pre-cooled by a GM cryocooler

2024-7-1

Design and development of a 4He sub-Kelvin sorption cooler

2024-7-1

Active cryocooling needs for NASA space instruments and future technology development

2024-7-1

Experimental investigation of the structure effects on the energy recovery and jet impinging process in a fast cooling Joule-Thomson cryocooler

2024-7-1

Experimental study on nitrogen pulsating heat pipes with different heat transmission distances and configurations

2024-7-1

The pressure-volume relationship in an ideal Stirling refrigerator

2024-6-19

Development of a 10 K automated sample exchange cryostat for SANS_CSNS

2024-6-18

Charging delay elimination of solder impregnated HTS coils with specific excitation current

2024-6-9

Exergy and pinch assessment of an innovative liquid air energy storage configuration based on wind renewable energy with net-zero carbon emissions

2024-6-8

Numerical study on collapsing cavitation bubble dynamics in cryogenic fluids

2024-6-7

Magnetic properties and cryogenic magnetocaloric effect in α-Gd2(MoO4)3 compound

2024-6-6

Damping characteristics of High-Temperature superconducting pinning maglev levitation system

2024-6-1

Helium screw compressor for 5tpd large-scale hydrogen liquefier

2024-6-1