Cross-sectional gradients of residual stresses, microstructure and phases in a nitrided steel revealed by 20 µm synchrotron X-ray diffraction

2019-10-1

Developing a new process to agglomerate secondary raw material fines for recycling in the electric arc furnace - The fines2EAF project

2019-5-1

Bainitic transformation during the two-step Q&P process in a lean medium Mn steel containing silicon

2019-1-1

Tribology Test Methods and Simulations of the Effect of Friction on the Formability of Automotive Steel Sheets

2018-9-1

Kinetics of molten iron oxides reduction using hydrogen

2018-7-1

DISSOLUTION BEHAVIOUR OF ULC STEEL IN CARBON SATURATED HOT METAL

2018-6-13

Surface Oxide State on Metal Powder and its Changes during Additive Manufacturing: an Overview

2018-1-1

A new method for the experimental simulation of surface crack formation in continuous casting

2017-4-1

A Combined Experimental and Numerical Approach to a Discrete Description of Indirect Reduction of Iron Oxide

2016-3-1

Yielding and failure of hot chamber die cast thin-walled AZ91D

2016-1-1

Disseminating results of RFCS supported research projects on EAF technology

2016-1-1

Numerical investigations of influences on the flow in a vertical twin roll strip caster for stainless steel

2016-1-1

Process parameter influence on selected quality features in high-pressure die casting

2016-1-1

Implementation of an open-die forging process for large hollow shafts for wind power plants with respect to an optimized microstructure

2015-7-13

Corrosion rate of high CO2 pressure pipeline steel for carbon capture transport and storage

2015-2-25

Roduction and characterization of steel sandwich structures with aluminum foam core [Realizzazione e caratterizzazione di strutture sandwich di acciaio con core in schiuma di Al]

2015-1-1

Microstructural characterization and layer stability of low-temperature carburized AISI 304L and AISI 904L austenitic stainless steel

2015-1-1

Influence of welding parameters on microstructure of welded joints SMAW/GTAW steel X10 CrMoVNb 9-1 (P91) [Influenza dei parametri di saldatura sulla microstruttura di giunti saldati SMAW/GTAW di acciaio X 10 CrMoVNb 9-1 (P91)]

2015-1-1

Thermal spray coatings for corrosion and wear protection of naval Diesel engines components

2014-1-1

Evaluation of corrosion resistance of biocompatible coatings on magnesium

2014-1-1

Corrosion behavior of carbon steel in acidic solutions containing thiosulfate and sulfite ions [Corrosione dell'acciaio al carbonio in acque debolmente acide contenenti ioni tiosolfato e solfito]

2014-1-1

Suitability study of Endless Strip Production technology for fabrication of api grades

2014-1-1

Interventi funzionali dedicati alla modifica della superficie degli ingranaggi: la cementazione e la nitrurazione come pretrattamento di rivestimenti PVD

2013-7-3

Production of aluminium coated ferritic stainless steel by co-rolling and annealing

2013-7-3

Cyclic behaviour and fatigue of stainless steels

2013-7-2

Investigation of corrosion resistance of pre-painted Zn-11%Al-3%Mg-0.2%Si alloy coated steel sheet through outdoor exposure test in Okinawa

2013-6-6

Study of localized corrosion of steel reinforcement in inhibited alkaline solutions [Studio della corrosione localizzata degli acciai per armature in soluzioni alcaline inibite]

2013-1-1

AA6060-T6摩擦撹拌溶接継手のミクロ組織の解析: 加工条件と粒径の相関関係

2013-1-1

Cold and warm formability of titanium sheets [Valutazione della formabilità di lamiere di titanio a freddo e a tiepido]

2012-1-1

Crystallographic analysis of martensite in 0.2C-2.0Mn-1.5Si-0.6Cr steel by EBSD

2011-7-24

Au based amorphous alloys: etching effects and nanocrystals formation.

2011-1-1

Effect of different contact formulations used in commercial FEM-Software Packages on the results of hot forging simulations

2010-11-25

Erosion and corrosion of steel in fresh concrete [Meccanismi di erosione dell'acciaio a contatto con calcestruzzo fresco]

2010-1-1

NN-SCC assessment of steels for buried pipelines by means of 3 point bending tests [Studio della NN-SCC di acciai per tubazioni interrate tramite prove di flessione in tre punti]

2010-1-1

Linear Friction Welding (LFW) of metal matrix composites

2010-1-1

ANALISI DELL’EVOLUZIONE MICROSTRUTTURALE DURANTE IL PROCESSO DI ESTRUSIONE DELLA LEGA AA6060 MEDIATE SIMULAZIONI FEM

2009-6-26

EFFECT OF PRE-STRAINING AND BAKE HARDENING ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF CMnSi TRIP STEELS

2009-6-26

EFFETTO DEL TRATTAMENTO AD ULTRASUONI DI LEGHE ALLO STATO LIQUIDO SULLA RESISTENZA A CORROSIONE

2009-5-26

ABOUT INITIAL SOLIDIFICATION IN CONTINUOUS CASTING OF STEEL

2008-7-30

Effect of hydrogen diffusion on environmental assisted cracking of pipeline steels under cathodic protection [Effetto della diffusione dell'idrogeno sui fenomeni di environmental assisted cracking di acciai per pipeline in condizioni di protezione catodic

2008-1-1

Cathodic protection of tanks bottom by means of linear grid anodes. Current and potential distribution [Protezione catodica del fondo di serbatoi con sistemi ad anodi lineari distribuiti. Distribuzione del potenziale e della corrente]

2008-1-1

ACTIVE CONTOUR SEGMENTATION FOR THE IDENTIFICATION OF METALLOGRAPHIC AND MORPHOLOGICAL ELEMENTS OF INTEREST IN DUCTILE CAST IRON

2007-6-30

Hydrogen embrittlement resistance of plastically strained pipeline steels [Resistenza all'infragilimento da idrogeno di acciai per tubazioni deformati plasticamente]

2007-1-1

Vacural Mueller Weingartenダイカスト機

2006-1-1

Comportamento meccanico in prove di fatica a caldo di compositi metallici a matrice di lega SP-700 rinforzata con fibre di Carburo di silicio tipo SCS-6

2005-7-3

Benchmark study of the EAF plants using KT injection system (Case of long products-carbon steel production)

2005-1-1

The VAI-CON Link Suspension System; From the Development to Six Years of Operational Experience

2005-1-1

The new VAI FUCHS ultimate EAF: Dawn of a New Era in Electric Steelmaking

2005-1-1

Applicazione delle reti neurali artificiali nella caratterizzazione della resistenza alla corrosione intergranularedi un acciaio inossidabile austenitico AISI 304L: influenza della temperatura di sensibilizzazione

2004-10-17

High-temperature XRD investigations on phase transformations

2004-2-17