Simulation of Interfacial Waves in Core-Annular Pipe Flow with a Turbulent Annulus

2024-9-10

Study of The Flow Characteristics of Pumped Media in The Confined Morphology of A Ferrofluid Pump with Annular Microscale Constraints

2024-9-10

Unified, Integral Approach to Modeling and Design of High-Pressure Pipelines: Assessment of Various Flow and Temperature Models for Supercritical Fluids

2024-9-10

Analysis of Ansys Fluent for Wall-Modeled Large-Eddy Simulation of Turbulent Channel Flow

2024-9-10

Effect of Trailing Edge and Span Morphing on the Performance of an Optimised NACA6409 Wing in Ground Effect

2024-9-10

On Using the Distributor as a Multi Degree- of-Freedom System to Mitigate the Pressure Pulsation in an Axial Turbine at Speed-No-Load

2024-9-10

Erratum: “Passively Enhanced Vortex-Induced Vibration Response of Side-by-Side Cylinders in Turbulent Flow” [ASME J. Fluids Eng., 2024, 146(7), p. 070903; DOI: 10.1115/1.4065302]

2024-9-10

Experimental Investigation on the Effect of Nozzle Design on Airlift Pump Performance

2024-8-24

A Solution Method for the Filtered Lifting Line Theory

2024-8-21

Effects of Tire Attributes on the Aerodynamic Performance of a Generic Car-Tire Assembly1

2024-8-10

Control of Flow and Acoustic Fields Around an Axial Fan Utilizing Plasma Actuators

2024-8-1

Exploring Near-Wake Structures: Bio-Inspired Convergent-Divergent Riblets on Circular Bluff Bodies

2024-8-1

Stability and Energy Balance Analysis of Axisymmetric Boundary Layer: Effects of Oblique Nonuniform Suction and Injection

2024-7-26

Wake Dynamics of Complex Turning Vanes Using Time-resolved Particle Image Velocimetry Measurements

2024-7-18

Hydrodynamic Design and Pulsation Evolution in an Axial-Flow Pump Based On Control Mechanism of Flow-Induced Excitation

2024-7-18

Flow Through a Passage with Scaled Additive Manufacturing Roughness Representing Different Printing Orientations

2024-7-16

Discussion on “Some Exact Analytical Solutions for Two-Dimensional Flow of an Incompressible Second Grade Fluid” (Saif, U., 2015, ASME J. Fluids Eng., 137(10), p. 101206)

2024-6-25

Closure to Discussion of "Some Exact Analytical Solutions for Two-Dimensional Flow of an Incompressible Second Grade Fluid" (Saif, U., 2015, ASME J. Fluids Eng., 137(10), p. 101206)

2024-6-25

Benchmarking the Performance of the Actuator-Disk Method for Low-Pressure Axial Flow Fan Simulation

2024-6-24

Stability Analysis of Pure Oil-Water Emulsion in Gravity-Based Separators

2024-6-24

Assessment of Ansys-Fluent Code for Computation of Two-Phase Flow Characteristics: A Comparative Study of Water-Air and Silicone Oil-Air In A Vertical Pipe

2024-6-19

Optical Considerations for Designing Laser-Based Volumetric Particle Tracking Velocimetry

2024-6-17

Numerical Investigation of the Impact of the Rectangular Nozzle Aspect Ratio on Liquid Jet in Crossflow

2024-6-10

Study of Temperature Drop Region in Transitional Region in Fluid-Film Thrust Bearings

2024-6-6

Computationally Efficient and Interface Accurate Dual-Grid Phase-Field Simulation of Turbulent Drop-Laden Flows

2024-6-6

Design, Fabrication and Testing of A Novel Thermally-Actuated Tesla Valve (TATV): A Hybrid Microvalve

2024-5-28

Influence of a Pair of Unequal Rotational Fluxes on Entrained Gaseous Filament

2024-5-28

Numerical Study On the Effect of Channel Configuration On Mixture Formation of an Axial Flow Wave Rotor Combustor

2024-5-17

Experimental Study of the Cavitating Flow on an Independently Heated Venturi Nozzle

2024-5-9

Analyzing Hydrogen Flow Behavior Based On Deep Learning Sensor Selection Optimization Framework

2024-5-8

Effects of Impact Energy and Aspect Ratio on the Motion of Particle Clouds in Stagnant Water

2024-5-6

Influence of Scallops On Windage Loss and Flow Characteristics in Disk-type Gap

2024-5-6

Flow Performance Enhancement of a Fluidic Oscillator Through the Integration of Rectangular Ribs On Coanda Surface

2024-4-26

Special Issue on the 2023 ASME-JSME-KSME Fluids Engineering Division Summer Meeting

2024-4-26

Erosion Wear Analysis On Valve Cage of Cage-Typed Sleeve Control Valve for Coal Liquefaction

2024-4-26

Compressible Flow Through Flat Valve Seals at Microscale Displacements

2024-4-24

The Measured Flow at the Inlet of a Francis Turbine Runner Operating in Speed No-load Condition

2024-4-24

Boundary-Layer Agitator for Advanced Convective Mixing

2024-4-16

LES/Lagrangian-Particle-Simulation of a Supersonic Reactive Turbulent Planar Jet

2024-4-16

Morphological Features of a Splashing Drop Extracted Using Explainable AI

2024-4-16

Passively Enhanced Vortex-Induced Vibration Response of Side-by-Side Cylinders in Turbulent Flow

2024-4-16

Direct Numerical Simulation On Millimeter-Sized Air Bubbles in Turbulent Channel Flow

2024-4-16

A Multi-GPU Based Real-Time Large-Eddy Simulation of Urban Wind in Seoul

2024-4-16

Time-Averaged Parameters of the Circular Synthetic Jet for Different Dimensionless Stroke Length

2024-4-15

Aerodynamic Performance Evaluation of a Coaxial Octocopter Based on Taguchi Method

2024-4-15

Influence of Permeability and Shear-Thinning Behavior On the Hydrodynamics Flow Features Around Porous Square Cylinders

2024-4-12

Bioinspired Fluid Dynamic Designs of Vertical-Axis Turbines: State-of-the-Art Review and the Way Forward

2024-4-12

Effects of Leading-Edge Blowing Control and Reduced Frequency on Aerofoil Aerodynamic Performances

2024-4-11

Vortex Identification Method Based On Topological Analysis and Velocity Gradient Invariance

2024-4-11

Effect of Tip Gap Size On the Tip Flow Structure and Turbulence Generation in a Low Reynolds Number Compressor Cascade

2024-4-11