Studying the hydration kinetics and mechanical-microstructural properties of Portland cements made with and without dredged sediment: experimental and numerical approaches

2024-6-11

Design of an explicit crack bridging constitutive model for engineered cementitious composites using polyvinyl alcohol (PVA) or polyethylene (PE) fiber

2024-6-11

Effect of recycled fine powder as a calcium source on fresh and hardened properties of geopolymer mortar

2024-6-3

The effects of synthetic wollastonite microfibers on PVA fiber-reinforced engineered geopolymer composites

2024-5-23

Shear behavior of hollow clay brick masonry wallet coated with short jute fiber reinforced mortar

2024-5-23

Transport properties of fly ash-slag-based geopolymer concrete with 2M sodium hydroxide combined with variations in slag percentage, Al/Bi ratio, and SS/SH ratio

2024-5-23

Influence of chemical pretreatment on the pozzolanicity of recycled glass microparticles used as a substitute for Portland cement

2024-5-23

Environmental benefits of microwave-assisted self-healing technology for pavements - A Life Cycle Assessment comparative study

2024-5-23

Structural aspects of concrete incorporating recycled coarse aggregates from construction and demolished waste

2024-3-25

Investigation of the bond properties between hybrid fiberreinforced concrete and BFRP bars after exposure to high temperature

2024-3-25

Durability effect of reclaimed asphalt aggregate on concrete road pavement

2024-3-25

Experimentation and numerical analysis of the influence of geogrids with emulsion insertion on the behavior of bituminous pavements - Case of Ouargla aerodrome

2024-3-19

Life cycle analysis and economic evaluation of cement and concrete mixes with rice husk ash: application to the Colombian context

2024-3-18

Shear strength and microstructural investigation on high-volume fly ash self-compacting concrete containing recycled concrete aggregates and coal bottom ash

2024-3-14

Influence of crystallizing type chemical admixture on precast micro concretes: a statistical analysis and holistic engineering overview

2024-3-14

Ultramarine blue pigment degradation in cementitious materials: a new approach to the phenomenon

2024-3-14

Experimental investigation of the behavior of concrete beams containing recycled materials reinforced with composite rebars

2023-12-5

Exploring the impact of graphene oxide on mechanical and durability properties of mortars incorporating demolition waste: micro and nano-pore structure effects

2023-11-8

A low carbon cement (LC3) as a sustainable material in high strength concrete: green concrete

2023-11-3

The effect of recycled concrete powder (RCP) from precast concrete plant on fresh and mechanical properties of cementitious pastes

2023-11-3

Effect of fiber section shape and volume fraction on the mechanical properties of steel-fiber reinforced concretes

2023-11-3

The effect of water absorption distribution of recycled coarse aggregate on the compressive strength distribution of high-performance concrete

2023-11-2

Eco-efficient thermoacoustic panels made of totora and gypsum for sustainable rural housing ceilings

2023-11-2

Analysis of two experimental setups to study mode II fracture on fibre-reinforced gypsum notched specimens

2023-8-28

Experimental investigation of clogging mechanism of pervious concrete made with variable aggregate gradations

2023-8-10

Computer vision application for improved product traceability in the granite manufacturing industry

2023-8-10

Investigation of reinforced concrete members with bond deterioration under tensile load

2023-8-10

Fresh, hardened and durability properties of sodium carbonate-activated Algerian slag exposed to sulfate and acid attacks

2023-8-10

Recycling of eps foam and demolition wastes in the preparation of ecofriendly render mortars with thermal-acoustic insulation properties

2023-8-9

Fresh, hardened and thermal properties of coating mortars containing mineral additions and vermiculite

2023-8-9

New insights into the production of sustainable synthetic aggregates and their microstructural evaluation

2023-7-28

Study on binary and ternary systems with cement, hydrated lime and fly ash: thermogravimetric analysis, mechanical analysis and durability behaviour

2023-7-10

Parameters of thermal performance of plaster blocks: Experimental analysis

2023-5-24

Influence of whitening additives on the properties of decorative slag-alkali cements and mortars

2023-5-24

Prediction of the mechanical behavior of mortars incorporating phase change materials using data mining techniques

2023-5-5

Enzyme-induced carbonate precipitation utilizing synthetic Ca2+-zeolite for low ammonium

2023-4-28

β-CaSiO3 and colloidal n-SiO2 based blended cement composites- their properties, regression analysis and micro-characterization studies

2023-4-12

Development of Magnesium/Calcium Oxalate Cements

2023-4-12

Performance of rice husk ash under different two periods combustion conditions and effect of particle size on the strength of mortar

2023-3-21

Effects of the mineralogical composition and particle size distribution of ladle furnace slag as a cement/fine aggregate replacement in concrete

2023-3-6

Demanda Gold sandstone (Burgos): effect of consolidation and ageing tests on its petrographic and petrophysical properties

2023-3-6

Preparation of shrinkage-free alkali-activated slag material using MgO as both the activator and the expansive agent

2023-3-6

Comparing the effects of jouravskite and ettringite on the hydration of the clinker

2023-3-6

Characteristic properties of fly ash-based self-compacting geopolymer mortars with synthetic wollastonite microfiber produced from silica and calcite

2023-2-24

Effect of enhancement treatments applied to recycled concrete aggregates on concrete durability: A review

2023-2-23