CO2 Laser Engraving of Injection Moulded Polycarbonate: Experimental Investigation

2021-2-1

Achieving refined overlay microstructure of a zn-55al-3mg-1.5si coating using high power diode laser (hpdl) surface treatment

2021-1-1

Debris-free Cutting of Quartz with Zero Kerf Width and Ultra-low Surface Roughness Using Femtosecond Bessel Laser Beam Filamentation

2020-6-1

Ultrafast Laser Drilling of Crack-free, Debris-free and Heat Affected Zone (HAZ)-free Blind Holes in Al2O3 with Flat Bottom and Reduced Taper Angles

2020-1-1

Debris-free, Zero Taper Cutting of BOROFLOAT 33 Glass Using a Femtosecond Bessel Laser Beam

2020-1-1

Laser Surface Engineering of Nylon 6.6 and the Effects Thereof on Adhesion and Biomimetic Apatite Coating Formation

2018-2-28

Effect of Laser Shock Peening (LSP) on the Phase Evolution, Residual Stress and Hardness of Hastelloy-X Superalloys

2018-1-1

Influence of aircraft attitude fluctuations on point cloud density and Digital Surface Model (DSM) accuracy from airborne LiDAR

2018-1-1

Performance analysis of Spectral Amplitude Coding-Optical Code Division Multiple Access (SAC-OCDMA) in free space optical networks with a multi-wavelength laser source

2017-12-31

CO2 laser surface engineering of polyethylene terephthalate (PET) for enhanced meat exudate conditioning film formation and bacterial response

2017-11-1

Towards a Technique for Controlling Wettability Characteristics and Conditioning Film Formation on Polyethylene Terephthalate (PET) Through Laser Surface Engineering

2017-7-1

Laser Surface Treatments and their Effects on Adhesion and Biomimetic Apatite Coating Formation

2017-6-26

Creating Superhydrophobic Surface Structures Via the Rose Petal Effect on Stainless Steel with a Picosecond Laser

2017-6-1

Application of ray-tracing to interpreting beam prints from fibre laser cutting

2017-3-7

In-plane polarimetric light scattering imaging of wooden surfaces

2017-1-1

Development and characterization of yttria stabilized zirconia and Al2O3 thin films by pulsed laser deposition: Special Issue

2016-9-1

Evaluation of the structural integrity of laser formed steel sheets for possible load bearing applications

2016-1-1

Lasers in Engineering: Preface

2016-1-1

Towards Laser-based Photonic Chip Integrated Quantum Random Number Generators

2016-1-1

Influence of laser beam polarization on micromachining of crystalline silicon using ultrafast laser pulses

2015-1-1

Parameter optimization for laser welding of NiTi wires by the taguchi method

2015-1-1

Study on the Influence of Laser Beam Polarization on Micromachining of Crystalline Silicon Using Ultrafast Laser Pulses

2015-1-1

Three-Dimensional (3-D) temperature measurement in a low pressure flame reactor using multiplexed tunable diode laser absorption spectroscopy (TDLAS)

2015-1-1

Laser tracker technology for static Monitoring of Civil infrastructure

2015-1-1

Characterization of the laser bonding of a linear low density polyethylene film to a polypropylene substrate

2014-12-31

Investigation of temperature distribution during CO2 and Fibre laser processing of Si3N4 engineering ceramic by means of a computational and experimental approach

2014-2-1

Revolutionary additive manufacturing : an overview

2014-1-1

LMDCAM, Computer Aided Manufacturing (CAM) Solution for Tool Path Generation for Build-up of Complex Aerospace Components by Laser Metal Deposition (LMD)

2014-1-1

Development of a high power Q-switched laser diode-pumped Nd:YAG master oscillator power amplifier (MOPA) laser with high repetition rate

2014-1-1

Characterization of Laser Deposited Ti6Al4V/TiC Composite Powders on a Ti6Al4V Substrate

2014-1-1

A 28 W multi-pulse high energy regenerative amplifier for a picosecond laser system

2014-1-1

Enhancement of the wettability characteristics of a nickel-titanium (NiTi) medical implant alloy by laser surface alloying with molybdenum (Mo) and Niobium (Nb)

2013-12-16

On the use of a Continuous Wave Nd:YAG Laser in the Generation of Random Numbers

2012-1-1

Characterization of weld bead geometry in fibre laser butt welding of mild steel sheets by means of statistical modelling

2012-1-1

Influence of Distortion on Part Accuracy for Indirect Metal Laser Sintering

2012-1-1

A numerical study of the temperature gradient mechanism in laser forming using different laser beam geometries

2012-1-1

Dual focus Nd:YAG laser welding of titanium alloys: effect on porosity formation

2012-1-1

A numerical model for studying laser cladding under pulse mode

2011-11-28

The enhancement of biomimetic apatite coatings on a nylon 6,6 biopolymer by means of KrF excimer laser surface treatment

2011-6-22

Fabrication of all-tube p- and n-type carbon nanotube field-effect transistors by the laser transfer method

2011-1-1

Consolidation Behaviour and Microstructural Characteristics of Al and a Mixture of Al-Cu Alloy Powders Following Selective Laser Melting Processing

2011-1-1

Influence of laser beam brightness during surface treatment of a ZrO2 engineering ceramic

2011-1-1

A proposed concept of a system for the removal of debris produced during laser micromachining

2010-12-1

Surface characterization and compositional evaluation of a fibre laser processed silicon nitride (Si3N4) engineering ceramic

2010-1-1

The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate.

2010-1-1

Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation

2010-1-1

On the Use of Terrestrial Laser Scanners to Facilitate Project Studies of Urban Transformation in the Historic Peninsula of the Metropolitan Area of Istanbul

2010-1-1

Investigation of the application of Nd : YAG laser welding to couple photonic devices and packaging

2007-12-1

An analysis of crack and porosity formation in laser surface treated magnesia partially stabilized zirconia (MgO-PSZ) and methods for alleviation

2007-9-6

Laser Surface Treatment of Ti-6Al-4V for Bio-Implant Application

2007-1-1