Effect of Process Conditions on Mechanical and Metallurgical Properties of Wire Arc Additively Manufactured 316L Stainless Steel

2024-9-13

Effect of Diffusion Annealing and Aging Post-Treatments on Scratch Properties of Boride Layers on CoCrMo Alloy

2024-9-13

In Situ Synthesis of Conjugated Polyvinyl Alcohol Derivative-Modified SnS2 Nanosheets with Improved Visible Photocatalytic Reduction of Cr(VI)

2024-9-13

TiC-Reinforced Austenitic Stainless Steel Laser Cladding Layer on 27SiMn Steel Surface: A Comparative Study of Microstructure, Corrosion, Hardness, and Wear Performance

2024-9-13

Combined Effect of Annealing Temperature and Pre-deformation on the Superelastic Behaviors of NiTi Shape Memory Alloys

2024-9-12

Multi-objective Optimization of Short-Circuit Gas Metal Arc Welding for Overhang Structures by Grey Relational Analysis Integrated Taguchi Method

2024-9-12

Dislocation Density Measurements from x-ray Diffraction of Austenite and Ferrite Phases in Superduplex UNS S39274

2024-9-12

Optimization of FSW Parameters Using SA Algorithm and ANFIS-Based Models to Maximize Mechanical Properties of AZ80A Mg Alloy Joints

2024-9-12

Research on Small Punch Test Method for Evaluating the Yield Strength of Gradient Nanostructured Material

2024-9-12

Quantification of Deleterious Phase Precipitation in a Hyper Duplex Stainless Steel Aged at 700-950 °C Using Optimized Linear Sweep Voltammetry: Effect of KOH Concentration

2024-9-11

Impact of Samarium on Microstructural Evolution and Tribological Behavior of FeCoNiCr High-Entropy Alloys Fabricated by Laser Metal Deposition

2024-9-11

The Effect of MB40 Addition on the Electrochemical Corrosion Resistance of an NdFeB Magnet Recycled from Electronic Waste

2024-9-11

Study on Corrosion Behavior of B30 Cu-Ni Alloy in Simulated Marine Environments

2024-9-11

Molecular Dynamics Study of Substrate Temperature and Incident Energy Influence on the Crystallization Behavior of Alumina Thin Film Deposition Process

2024-9-10

Examination of Minimum Quantity Lubrication Performance in the Hard Turning of AISI/SAE 1060 High-Carbon Steel

2024-9-10

Flow Stress Models for 40Cr10Si2Mo Steel and Their Application in Numerical Simulation of Hot Forming

2024-9-10

Effect of Different AC Densities on Corrosion Resistance and Mechanism of FeCoNi HEA in Simulated Golmud Soil Environment

2024-9-10

Effect of Derivative Cutting of Flank-Faced Textured Ceramic Tools on Machined Surface

2024-9-10

Simultaneous Improvement of the Mechanical and Corrosion Properties of a 3102 Aluminum Alloy via Ti Addition

2024-9-9

Effects of Bi Doping on Zn-Rich Phase Evolution and Physical and Chemical Properties of Sn-6.5Zn Lead-Free Solder Alloy

2024-9-9

Precipitate Structure, Microstructure Evolution Modeling and Characterization in an Aluminum Alloy 7050 Friction Stir Weld

2024-9-9

Effect of Cladding Fe-Based Coating on the Microstructure, Wear Resistance, and Dynamic Performance of CL60 Steel

2024-9-9

Assessment of Mechanical and Tribological Properties of SiC- and Multi-walled Carbon Nanotube-Reinforced Surface Composites of AA7075-T6 Fabricated via Friction Stir Processing

2024-9-6

The Effect of Detonation Frequency on the Linear Reciprocating Wear Behavior of Detonation Sprayed Ni-20%Cr Coatings at Elevated Temperatures

2024-9-6

High-Temperature Oxidation, Corrosion, and Wear Resistance of Cr‐xAl Laser Coated on Metal Zr Surface

2024-9-6

Investigation of Compressive Mechanical Properties and Microstructure Evolution of 93W-4.9Ni-2.1Fe Heavy Alloy under a Wide Range of Strain Rates

2024-9-6

Influence of High Current Impulses on Element Distribution in Creep-Deformed Single-Crystal Ni-Based Superalloys

2024-9-6

Optimizing Advanced High-Strength Steel Welds: The Role of Regional Pre-heating in the Heat-Affected Zone

2024-9-5

Investigation of O Phase Spheroidization Behavior in Ti2AlNb Alloy Using High-Throughput Experiments

2024-9-5

Investigating the Impact of Heat Treatment on the Mechanical, Corrosion, and Heat-Transfer Characteristics of Thermal Oxide Layers on SS304

2024-9-5

Effects of Alloying Elements (Ti and Cr) on the Microstructures, Mechanical and Wear Properties of Manganese Brasses

2024-9-5

The Influence of Flash Welding Parameters on the Microstructure and Mechanical Performance of Dissimilar Steel Welded Joints

2024-9-5

Composition Design and Experimental Study of Erosion Wear Resistant Bimetal Composite Pipe Inner Layer Based on Gray System Theory and Genetic Algorithm

2024-9-5

Experimental Investigation and Metallurgical Studies on D9 Tube to SS316 Tapered End Plug Using Magnetic Pulse Welding

2024-9-5

Effect of Al/Ti Ratio on Hot Deformation Characteristics and Microstructure Evolution of 15Cr-30Ni-Fe Heat-Resistant Alloy

2024-9-4

Effects of Heat Treatment Pulse on Microstructure and Mechanical Properties of 7075 Aluminum Alloy Resistance Spot Welding Joints

2024-9-4

Preparation of Low-Cost and Low-Density Silicone Rubber-Based Thermal Interface Materials by Boron Nitride Oriented Synergistically with Alumina

2024-9-4

Strength and Fracture Characteristics of Silica Sol Shell Reinforced with Abaca Fibers Impregnated with Aluminum Dihydrogen Phosphate

2024-9-4

Mechanical and Electrical Properties of Silver Paste Sintering on Copper-Alloy Slip Rings

2024-9-4

A380 Aluminum Molten Processing Using Silica-Nanoparticle Enriched Zeolite with Thermal Aging Treatment

2024-9-4

In Situ Laser-Assisted Micro-imprinting Process for Microscale Tapered Hole Forming

2024-9-3

Influence of Be Content and T4 Temper Heat Treatment on Hardness and Wear Behavior of Al-Alloy A319

2024-9-3

Development of Material Sensors Made of Metastable Austenitic Stainless Steel for Load Monitoring

2024-9-3

Effect of Aging Process on Strengthening Phase Particles of 6056 Aluminum Alloy for Bolts

2024-9-3

Insight into the Anti-Corrosion Mechanism of Halogen Anions in Bisimidazoline Derivatives as Corrosion Inhibitor for Q235 Steel in 1.0 mol/L HCl

2024-9-3

In Situ Pre-heating in Wire Arc Additive Manufacturing: Design, Development, and Experimental Investigation on Residual Stresses and Metallurgical and Mechanical Properties

2024-9-3

Enhanced Anti-corrosion and Anti-fouling Properties of Galvanized Iron Using Nanocomposite Hydrophobic Coatings

2024-9-3

Microstructure Evolution and Prediction Model of 6082-T6 Aluminum Alloy Pulsed Metal Inert Gas Welded Joint

2024-9-3

Enhancing Creep Resistance of Powder-Metallurgy Near-β Titanium Alloy via Rapid Heat Treatment Followed by Aging

2024-9-3

Investigations on Energy Absorption Behavior of Laser Powder Bed Fusion-Based 2D and 3D Multi-layered Sandwich Lattice Structures

2024-9-3