TEKSTIL VE KONFEKSIYON，发表关于服装和纺织技术各个分支以及相关领域的基础和应用研究的论文，例如天然和合成纤维、纱线和织物的生产和性能、技术纺织品、整理应用、服装技术、分析、测试, 和质量控制。

The journal 'Tekstil ve Konfeksiyon' publishes fundamental and applied research papers on various branches of clothing and textile technology and related fields. These studies cover the production and performance of natural and synthetic fibers, yarns and fabrics, technical textiles, finishing applications, garment technology, analysis, testing, and quality control.

《Tekstil ve Konfeksiyon》期刊发表关于服装和纺织技术各个分支及相关领域的基础和应用研究论文。这些研究包括天然和合成纤维、纱线和织物的生产与性能、技术纺织品、整理应用、服装技术、分析、测试以及质量控制等方面。

Tekstil ve Konfeksiyon

This paper presents impact of the use of hybrid weft yarns on denim fabric performance. It explores the synergy between the mechanical properties of these yarns and their influence on fabric characteristics like elasticity, recovery, and bagging resistance. For this purpose, different types of elastane in different thicknesses, polyester and elastomultiester were used in the production of soft-core and double-core spun yarns. Highlighting significant advancements in yarn production technologies and material selection, the study underscores the potential of these yarns in enhancing the functional attributes of denim fabrics. The results indicated that rather than the type of elastane, the characteristics of the yarn type and core components had statistically significant effects on the performance of yarn and fabric.

Tuba Ute

TEKSTİL VE KONFEKSİYON

A comprehensive study on the component properties of hybrid weft yarns and their effects on denim fabric performance

混纺纬纱组分特性及其对牛仔面料性能影响的综合研究

This study investigated the auxetic performances of single and double layer fabrics woven by using braid weft yarns with different structural parameters. Non-elastane braid weft yarns containing of yarn components with different filament numbers and braid weft yarns containing elastane and conventional warp yarns were used in fabrics. To investigate the effects of weave, fabrics with single and double layer structures were woven on an industrial weaving machine. Experimental results showed that the fabrics woven with both non-elastane and elastane braid weft yarns showed an auxetic performance by giving Negative Poisson's Ratio (NPR) values. It was observed that generally fabrics woven with braid weft yarns containing elastane could improve the auxetic performance. Fabric woven with non-elastane braid yarns of high filament numbers showed a higher NPR. When the effect of the weave on the auxetic performance was examined, a double layer fabric structure was seen to reduce the auxetic effect.

Mine Akgün

Fatih Süvari

Recep Eren

Tuğba Yurdakul

Investigation of Auxetic Performances of Single and Double Layer Fabrics Woven with Braid Weft Yarns of Different Structural Parameters

不同结构参数编织纬纱的单层和双层织物负泊松比性能研究

Using hollow yarns can change and improve many qualities of fabrics including thermal, acoustic, or mechanical properties. Using technical yarns in commercial textile products has been studied extensively to bring them some sort of functionality. In this study, side-by-side 50%/50% hollow bicomponent yarns made from different raw materials were tested and evaluated to determine their processing behaviour and performance characteristics. All yarns have coPET as one component where the other component is PET, recycled PET (rPET) and PA6, respectively. The mechanical and physical properties were evaluated by various tests, including unevenness, crimp testing, hollow ratio, and shear test. Their thermal and thermomechanical properties were also evaluated with DSC analysis. Same evaluations were done on the non-textured and textured state of the yarns to see the effect of the heat treatment.

Merve Bulut

Merve Küçükali

Cevza Candan

Fatma Banu Nergis

Tuğba Zengin

Aysun Saraç

Rasim Boyacıoğlu

Ecenur Tor

A COMPERATIVE STUDY ON THE PERFORMANCE OF SIDE-BY- SIDE HOLLOW BICOMPONENT YARNS

并列中空双组分纱线性能的比较研究

Nowadays, velvet fabrics are widely used in upper clothing, curtains and especially upholsteries. One of the most important problems encountered in them is the distancing of the piles from the surface of the fabric and the other is discoloration over time. In addition to the fabric properties, yarn and fiber properties also affect this situation. In this article, the effect of fabric abrasion on the production parameters was investigated in face to face warp velvet fabrics. The abrasion resistance of 100% cotton (10, 15, and 20 thousand rpm (rotation per minute)) and 100% polyester (30, 45, and 60 thousand rpm (rotation per minute)) velvet fabrics has been tested. The fabrics were produced using 3 different weft yarn counts (150, 300, and 450 deniers for polyester and 6, 12, and 20 Ne for cotton), 3 different weft densities (20, 22, and 24 picks/cm for polyester and 11, 13, and 15 picks/cm for cotton), 3 different pile heights (2, 3, and 4 cm) and two different pile connection types (V and W), and the abrasion of the fabrics was tested with a Martindale device. The results were analyzed. In addition, The effects of production parameters on fabric color were investigated in face to face warp velvet fabrics. Cotton fabrics were dyed with reactive blue, yellow and red, while polyester fabrics were dyed with disperse blue, yellow and red. Color properties and gloss have been tested and the results were analyzed. According to the test results, the increase in weft yarn count (increasing denier/decreasing Ne) causes an increase in abrasion resistance, while the increase in pile height reduces the abrasion resistance. The W bonded fabrics were found to be more resistant to abrasion than the V bonded fabrics. The color properties of the fabrics produced were tested in spectrophotometer test devices and the effects of production parameters were analyzed. It was determined that deep colors such as blue and red have an effect on color properties, while light colors such as raw fabric and yellow velvet fabric do not have a significant effect. It was also detected that raw and yellow velvet fabrics have more gloss than blue and red velvet fabrics.

Yunus Emre Kayserili

The Effect of Production Parameters Of Face to face Warp Velvet Fabric on Abrasion Resistance and Colour Properties.

面对面经编丝绒织物生产参数对耐磨性和色牢度的影响。

The rapid development of smart and wearable textiles has been driven by the need for smaller and lighter electronic circuits. To make textile surfaces conductive, various methods have been developed, with vapor-phase polymerization being a preferred method due to its smoothness, conductivity, and ease of application. This study investigates the effect of fundamental characteristics of textile fabrics, such as weave type and filament count, on electrical conductivity. Fabrics woven with different filament counts and weave types were coated with PEDOT polymer using vapor-phase polymerization. The results showed that the fabric woven with 150F288 yarns and a 3/1 twill weave exhibited lower electrical resistance, attributed to the microfibrous structure of the yarn and the twill's staggered structure. Despite increases in resistance values after performance tests, the electrical resistance values remained within a sufficient conductivity range. This research contributes to the understanding of how fabric characteristics affect the electrical conductivity of coated textiles, paving the way for the development of smart electronic textiles.

Serkan Yıldız

Aslı Hockenberger

Investigating the Effect of Weave Type and Filament Count on Electrical Conductivity of Polyethylene Terephthalate (PET) Fabrics Coated with PEDOT Polymer

研究编织类型和纤维数量对聚对苯二甲酸乙二醇酯（PET）织物涂覆PEDOT聚合物电导率的影响

This study delves into the exploration of an alternative bleaching method as a substitute for hydrogen peroxide, addressing concerns related to its excessive chemical usage, high waste load, and elevated energy and water consumption. Photocatalytic bleaching was implemented on 100% cotton fabrics. Initially, hydrogen peroxide served as a catalyst, and the photocatalytic effect was meticulously examined. Subsequently, nano-sized TiO2 was introduced into the photocatalytic recipe, and operational conditions were fine-tuned to determine the optimal bleaching process for cotton fabrics. All photocatalytic experiments were systematically compared with conventional hydrojen peroxide bleaching method. A comprehensive analysis, encompassing color spectrum values, SEM, SEM-EDX, XRD, and FTIR-ATR tests, was conducted. The results revealed a notable 13.36% enhancement in whiteness performance during bleaching when subjected to photocatalytic treatment with nano TiO2 and H2O2 in tandem. This study posits itself as an environmentally conscious alternative to the long-standing conventional bleaching processes prevalent in the textile industry.

Zeynep Ömeroğulları

Zeynep Ciğeroğlu

Photocatalytic Bleaching Process of Cotton Fabric with H2O2 and H2O2 /n-TiO2

棉织物光催化漂白工艺：H2O2与H2O2/n-TiO2

In this study, a nanofiber surface loaded with apheresis platelet concentrate (APC) was produced for the first time to develop a bioactive wound dressing design. Nanofiber surface (n=5) consisting of polyurethane polymer outer layer, polyvinyl alcohol polymer middle layer, and polycaprolactone polymer matrix inner layer were produced via the electrospinning method. The surface morphologies of the produced nanofiber surfaces were examined by scanning electron microscopy. Quantitative analyzes of growth factors released from the APC-loaded composite nanofiber surfaces into phosphate-buffered saline at certain time intervals were performed with the ELISA. When the release amounts between bFGF, EGF, and PDGF-AA groups were compared, a significant difference was found in all periods (p0.05), but there was a significant difference between the EGF and PDGF-AA growth factors (p

Hülya Yılmaz

Cansu Aras

Mehmet Karaçay

Merve İlkay Altuntuğ Cesur

Esra Karaca

Şehime G Temel

Emel Başkan

Barbaros Oral

Ekrem Kaya

Investigation of the Release of Growth Factors from Apheresis Platelet Concentrate (APC) Loaded Three Layered Composite Nanofiber Surface

从三层复合纳米纤维表面释放血小板单采浓缩物（APC）中生长因子的研究

In this study, a photocatalytic process was applied as an alternative to conventional hydrogen peroxide bleaching on 100% cotton fabric. The effects of ZnO nanoparticles and boric acid as catalysts were investigated. Additionally, the synergistic impact of boric acid on the well-known bleaching effect of titanium dioxide nanoparticles was explored. Unlike existing literature, the study uniquely addressed whether the photocatalytic process, without the use of any catalyst, has a specific effect, particularly in whitening, on the color spectrum. All conducted photocatalytic processes on cotton fabrics were compared with conventional hydrogen peroxide bleaching in terms of color spectra (CIE L*, a*, b*, whiteness indexes) besides the SEM, SEM-EDX, and FTIR-ATR characterization tests. Moreover, XRD, SEM, and FTIR-ATR analysis results of ZnO nanoparticles were also shared in this study. This research is believed to shed light on future studies by evaluating more environmentally friendly pre-treatment processes in textile industry.

Photocatalytic Activity of Zinc Oxide Nano Particules and Boric Acid for Bleaching Process on Cotton Fabric

氧化锌纳米颗粒和硼酸对棉织物漂白过程的光催化活性

Abbreviation
Journal Impact	0.47
Quartiles(Global)	MATERIALS SCIENCE, TEXTILES(Q4)

ISSN	1300-3356
h-index	19

Publication Information	Publisher: Ege University Press，Publishing cycle: Quarterly，Journal Type: journal，Open Access Journals: No
Basic data	Year of publication: 2008，Proportion of original research papers: 100.00%，Self Citation Rate:16.70%， Gold OA Rate: 0.00%
Average review cycle	网友分享经验：>12周，或约稿
Average recruitment ratio	网友分享经验：容易

Tekstil ve Konfeksiyon

Journal Citation Format

A journal article with 1 author

A journal article with 2 authors

A journal article with 3 authors

A journal article with 5 or more authors

Books Citation Format

Thesis Citation Format

Web sites Citation Format

Patent Citation Format

Staying up late manually editing references? ivySCI automatically matches journals and helps you generate references with a single click.

Share Submission Experience

A comprehensive study on the component properties of hybrid weft yarns and their effects on denim fabric performance

Investigation of Auxetic Performances of Single and Double Layer Fabrics Woven with Braid Weft Yarns of Different Structural Parameters

A COMPERATIVE STUDY ON THE PERFORMANCE OF SIDE-BY- SIDE HOLLOW BICOMPONENT YARNS

The Effect of Production Parameters Of Face to face Warp Velvet Fabric on Abrasion Resistance and Colour Properties.

Investigating the Effect of Weave Type and Filament Count on Electrical Conductivity of Polyethylene Terephthalate (PET) Fabrics Coated with PEDOT Polymer

A comprehensive study on the component properties of hybrid weft yarns and their effects on denim fabric performance

Photocatalytic Bleaching Process of Cotton Fabric with H2O2 and H2O2 /n-TiO2

Investigation of the Release of Growth Factors from Apheresis Platelet Concentrate (APC) Loaded Three Layered Composite Nanofiber Surface

Photocatalytic Activity of Zinc Oxide Nano Particules and Boric Acid for Bleaching Process on Cotton Fabric

Investigating the Effect of Weave Type and Filament Count on Electrical Conductivity of Polyethylene Terephthalate (PET) Fabrics Coated with PEDOT Polymer