Durability self-compacting mortar under external chemical attacks based on composite binder

2024-7-27

Investigation of calcite and huntite/hydromagnesite mineral in co-presence regarding flame retardant and mechanical properties of wood composites

2024-7-27

Perspective of concrete with Portland composite cement CEM II/C-M (S-LL)

2024-7-27

Transport Properties of Internally Cured Self Compacting Concrete with Fly Ash

2024-7-24

Environmental Assessment of Construction Products – Challenges, Priorities, and Needs from Producers’ Perspective. A Review

2024-7-24

Diagnostics of premature damage to surface-hardened industrial concrete floors

2024-6-6

Effect of lithium, strontium and barium carbonates on the belite phase formed at 1200°C

2024-6-6

Characteristics of products made in the process solidification and stabilization of fly ash from combustion of sewage sludge

2024-6-6

Mechanical performance and water resistance of a carbonated hemihydrate gypsum and slaked lime composite

2024-5-30

Carbonation behavior of concrete produced using CO2 as an admixture

2024-5-30

Physical and mechanical properties of meta-halloysite-based geopolymer mortars

2024-4-13

Evaluation of microbially induced carbonate precipitation in repairing process of cement mortars by Raman spectroscopy

2024-4-9

The influence of selected mineral ingredients on the technological properties of sealing slurries

2024-4-9

Application of polymer concrete containing industrial bottom ashes in footing plates for energy poles

2024-4-9

Classical and new insights into the methodology for characterizing the hydration of calcium aluminate cements

2024-4-9

Investigation of the effect of flexural strength test damage on compressive strength of construction materials

2024-2-12

Effects of FeNi3/SiO2 /GO nanoparticles on the mechanical and durability properties of concrete

2024-2-12

Impact Resistance of Sustainable Reactive Powder Concrete and Reinforced Concrete Slabs

2024-1-30

The influence of internal hydrophobization using organosilicon admixture on the performance and the durability of concrete

2024-1-11

Effect of self-compacting concrete placement technology on the load-bearing capacity of the concrete-concrete and steel-concrete bond in layered elements

2023-12-27

Efficiency evaluation of a commercial superficial strengthening system applied to AAC-block walls under diagonal compression

2023-12-6

Dissimilar surface treated recycled coarse aggregate in concrete

2023-12-6

Rheological properties and mechanical strength of self-compacting mortars produced with marble powder and calcined clay

2023-12-6

Air entrance additive effect on geopolymer mortar thermal conductivity

2023-12-6

Production of environmentally-friendly, high-strength repair mortar for the restoration of historical buildings

2023-12-6

Application of digital image analysis as a method of assessing the of carbonation process of cement binders – impact of distortion on the results of real and model samples

2023-9-13

Residue after the extraction of potassium and chlorine from by-pass dust as a new raw material for the synthesis of low-emission Portland clinker

2023-9-13

Semi-quantitative measurement of calcium carbonate in historic gypsum mortars, using diffuse reflectance infrared Fourier transform spectroscopy

2023-9-13

Concrete durability evaluation in new built pavement sections of expressways in Poland

2023-9-13

The use of marine seashells as aggregates in pervious concretes

2023-9-13

Risk analysis in quality assessment of ready-mixed concrete using fuzzy logic

2023-6-6

Experimental investigation on the application of concrete produced with limestone and dolomitic limestone aggregates in building constructions

2023-6-6

Influence of vacuum infiltration on mechanical properties of polymer concrete filled with lightweight ceramic aggregates

2023-6-6

Analysis of the development of autogenous shrinkage of CEM I 42.5R and CEM III/A 42.5N cement pastes with different water to cement ratios

2023-6-6

The effects of apricot kernel shell nanobiochar on mechanical properties of cement composites

2023-6-6

An evaluation of cooling Portland cement mortars exposed to high temperature, by using firefighting foam

2023-4-19

Statistical analysis on mechanical behaviour of ternary blended high strength concrete

2023-4-13

Volumetric stability and elastic properties of concrete subjected to simulated service exposure conditions on road pavements

2023-4-13

The influence of eggshell powder and limestone on the rheological properties of cement pastes

2023-4-13

The risk of a different assessment of the performance of cementitious ceramic tile adhesives in the light of the results of interlaboratory comparisons

2023-3-17

Influence of pore structure on corrosion resistance of high performance concrete containing metakaolin

2023-2-26

Calcined marl as a potential main component of cement

2023-2-26

Impact of fly ash and bagasse ash on durability performance of lightweight concrete with the experimental study

2023-2-26

Effect of synthetic zeolite on tobermorite synthesis

2023-2-26

Effect of synthetic zeolite on tobermorite synthesis

2023-2-26

Current situation and further development of AAC in Europe

2022-1-1

Performance of concrete containing recycled masks used for personal protection during SARS-CoV-2 coronavirus pandemic

2022-1-1

Properties of cement with the low Portland clinker and the different content of silica fly ash as well as granulated blast furnace slag

2022-1-1

Environmentally friendly material solutions in the technology of autoclaved aerated concrete

2022-1-1

Experimental investigation on influence of hybrid fibers in flexural behavior of reinforced concrete beams

2022-1-1