Prediction of end-point phosphorus content of molten steel in BOF with machine learning models

2024-1-1

Effect of regular thicknesses on the microstructural and quantitative analysis for a hypo-eutectic ductile iron alloyed with Ni and V

2024-1-1

Mechanical properties and failure analysis of PLA/copper composites fabricated by fused deposition modelling

2024-1-1

Effect of oxidizing agents on the treatment of a Colombian lead ore through hydrometallurgical alternative processes

2024-1-1

Recent advances in electrochemical recovery of rare earth elements from NdFeB magnets

2024-1-1

Diffusion bonding of RAFM steels: Evolution of interfacial oxide layer with pressure and microstructure and mechanical property after post bonding heat treatment

2024-1-1

Study on the behavior of impurity removal from lithium iron phosphate slag using the ultrasonic-assisted sulphuric acid leaching

2024-1-1

Milling parameter optimization for refinement of NiO/Al mixtures and synthesis of Ni/Al2O3 nanocomposites

2024-1-1

Effects of CeO2/Y2O3 rare earth oxides on microstructure and properties of in-situ synthesized WC-reinforced Ni-based cladding layer

2024-1-1

Hydrometallurgical processing of molybdenum middlings from Shatyrkul-Zhaysan cluster ore

2024-1-1

Carbonitriding reduction of TiO2 in the CH4-H2-N2 system: Reduction temperature effect and kinetics

2024-1-1

Recovery of pure lithium phosphate from sulfuric acid leaching solutions of spent LiFePO4 batteries by solvent extraction and chemical precipitation

2024-1-1

Electrochemical investigation and thermodynamic assessment of the Mg-Pd system

2024-1-1

Aluminizing as a method of improvement of Mar-M247 alloy lifetime

2024-1-1

Effect of olivine as MgO-bearing flux on low- and high-alumina iron ore pellets

2023-1-1

Effect of temperature on oxidation behavior and occurrence state of sulfur in KR slag

2023-1-1

Corrosion properties of aluminized 16Mo3 steel

2023-1-1

Thermodynamic description of the Mg-O and Al-O systems

2023-1-1

Existent state and removal rate of silver in lead-silver slag during the melt-vaporization process

2023-1-1

The melting performance blast furnace slags with high alumina content

2023-1-1

Modeling of partial reduction of hematite with carbon-monoxide in tunnel furnace

2023-1-1

Study on wear behaviour characteristics of ZrO2 and ZrN coated AZ91D Mg alloy

2023-1-1

Recovery of pure MnSO4 by crystallization after separation of Fe(III) and Zn(II) from the reductive leaching solution of manganese dust containing Mn3O4

2023-1-1

Thermodynamic measurements and ab initio calculations of the indium-lithium system

2023-1-1

Combing role of MgO and Al2O3 on viscosity and its correlation to structure of fluorine-free mold fluxes

2023-1-1

Corrosion of a chimney liner operated for 130,000 hours

2023-1-1

Solidification behavior and environmental risk assessment of toxic elements on tailings from carbothermic reduction-magnetic separation of lead blast furnace slag

2023-1-1

Weldability study of dual phase and transformation induced plasticity automotive steels

2023-1-1

Microstructure and oxidation resistance of Pd+Zr and Pd+Hf co-doped aluminide coatings deposited on Mar-M247 nickel superalloy

2023-1-1

Effect of ECAP process on deformability, microstructure and conductivity of CuCoNi alloy

2023-1-1

The magnesium-palladium-silver system: Thermodynamic properties of the liquid phase

2023-1-1

Phase transformation mechanism of oxidation roasting of low-grade polymetallic chalcopyrite ore in the presence of CaO

2023-1-1

Identification of Fe-bearing phases in the as-cast microstructure of AA6026 alloy and their evolution during homogenization treatment

2023-1-1

Kinetic mechanism of FeCr2O4 reduction in carbon-containing iron melt

2023-1-1

Microstructure development, mechanical properties and underlying mechanism of micro-TiN-reinforced AlSi10Mg composites fabricated by selective laser melting

2023-1-1

Ab-initio combined the Calphad approach to the phase equilibria in the ternary Ti-Mo-N system

2023-1-1

Effect of forging sequence and heat treatment on microstructure of high-duty power-plant shaft made of Cr-Mo ultra-high strength steel

2023-1-1

Smelting of low-grade saprolitic nickel ore in DC-arc furnace

2023-1-1

Effect of laser hardening on the mechanical, tribological and corrosion properties of low alloy steels

2023-1-1

Lithium slag leach solution refining by hydroxide precipitation

2023-1-1

The influence of new severe plastic deformation on microstructure, mechanical, and corrosion properties of Mg-0.8Mn-0.5Ca alloy

2023-1-1

Synthesis of ultrafine (Mo,W)Si2 composite powders from high purity molybdenum concentrate

2023-1-1

Effect of low aluminum additions in the microstructure and mechanical properties of hot forged high-manganese steels

2023-1-1

Influence of microstructure and crystallographic texture on hydrogen diffusion in IF-steel

2023-1-1

Numerical simulation and application of argon blowing from tundish cover for bloom continuous casting

2023-1-1

Synergistic effect of Pd+Rh on the microstructure and oxidation resistance of aluminide coatings

2023-1-1

Matte-slag separation behavior as a function of iron phase reduction in copper slag

2023-1-1

Synthesis of high purity magnesia MgO from Algerian dolomite ore

2023-1-1

The role of Si at a lower level on the mechanical properties of Al-based automotive alloys

2023-1-1

Influence of thermal ageing on tensile-plastic flow and work hardening parameters of Indian reduced activated Ferritic Martensitic steel

2023-1-1