Effect of high-density-polyethylene (HDPE) and waste tire rubber (WTR) on laboratory performance of styrene butadiene styrene (SBS) modified asphalt

2024-9-12

Measuring strain distributions in an asphalt pavement using fibre optic sensors under static loading by test vehicles

2024-9-12

Influence of PET fibres on the tensile characteristics of cemented sand treated with silica fume

2024-9-5

Utilising natural pigments as a filler replacement on the mix design, performance and colorimetric characteristics of the microsurfacing mixture: laboratory evaluation

2024-8-31

Bitumen and mastic local rupture test modelling with DEM

2024-8-26

Mechanism and structure of micro-nanofluid directional heat conduction in asphalt pavement in plateau permafrost regions

2024-8-18

An investigation of the asphalt blending during recycling using the analytical solutions of the binder diffusion models

2024-8-18

Assessment of aging behaviour of reclaimed asphalt binders: multi-scale mechanical and microstructural characterisation

2024-8-12

Automatic detection of loose gravel condition using acoustic observations

2024-8-12

Application of recycled lignin powder as a sustainable additive for soil improvement against water resistance

2024-8-12

Verification of time-temperature superposition principle for viscoplastic strains of asphalt mixtures obtained from creep-recovery tests in the low-strain regime

2024-8-12

Mechanical behaviour of bridge expansion joint interfaces filled with novel polyurethane-modified asphalt

2024-8-12

Semi-analytical modelling of realistic tire-pavement contact: an analysis of pavement surface cracking damage under critical driving conditions

2024-8-3

Resilient and rutting response of unbound granular material and subgrade soil influenced by initial state and stress conditions

2024-7-31

Prediction of asphalt low-temperature performance by FTIR spectra using comparative modelling strategy

2024-7-31

Improving storage stability and rheological performance of asphalt rubber modified with nanosilica and Sasobit

2024-7-26

Polishing-induced skid resistance deterioration characteristics of grooved runway pavements

2024-7-23

Influence of ageing and moisture conditions on the ravelling resistance of the micro-surfacing mix

2024-7-22

Strength and durability characteristics of geopolymer treated pond ash as pavement material

2024-7-19

Airfield pavement performance prediction using Clustered Markov Chain Models

2024-7-17

Evaluation of an antioxidant to improve the aging resistance of SBS modified asphalt binder based on chemical mechanical analysis (TI CAB)

2024-7-16

Artificial intelligence techniques for pavement performance prediction: a systematic review

2024-7-14

PaveSAM – segment anything for pavement distress

2024-7-11

Performance evaluation of marginal materials in geosynthetic reinforced base layers

2024-7-9

Comparison between ACN–PCN and ACR–PCR for rigid airport pavement with case study

2024-7-9

Response surface regression and machine learning models to predict the porosity and compressive strength of pervious concrete based on mix design parameters

2024-7-9

Evaluation of piezoresistive response and freeze–thaw damage of self-sensing cement mortar based on conductive fibre

2024-7-7

Optimising waste cooking oil as rejuvenator for recycled mixtures: a laboratory-based approach

2024-7-5

Mechanical strength of an hot-mix asphalt using recycled concrete aggregate: mass and volume proportioning

2024-7-3

Exploring the impact of humidity and water on bituminous binder aging: a multivariate analysis approach (TI CAB)

2024-6-17

Design of pavement structures consisting of paving slabs with hydraulically bound joints and bedding

2024-6-11

Short- and long-term mechanical performances of damaged porous asphalt mixture treated with asphalt emulsion

2024-6-11

Study on properties of self-lighting cement pavement material

2024-6-5

From: 2022 ISAP Symposium

2024-6-3

Use of Hansen Solubility Parameters (HSP) in the selection of highly effective rejuvenators for aged bitumen

2024-5-30

Evaluation of warm mix effect in laboratory using a self-developed WMA additive Alube

2024-5-27

Prediction of asphalt concrete energy release rate from Texas Overlay Test using machine learning

2024-5-24

Determination of complex Poisson’s ratio of asphalt binders using torsion-tension tests in a dynamic shear rheometer

2024-5-22

A comprehensive evaluation on particles breakage characteristics of waste argillaceous gangue as subgrade filler

2024-5-21

A systematic review of geo-polymer stabilised reclaimed asphalt pavement (RAP) as a base layer of pavement

2024-5-14

Macroscopic properties and microscopic characterisation of an optimally designed anti-cracking stone base course filled with cement stabilised macadam

2024-5-10

Expansion process of foamed bitumen considering surface energy

2024-5-3

Effect of UV radiation on the high temperature and fatigue performance of SBS modified asphalt and asphalt mixture

2024-4-24

Leaching of polycyclic aromatic hydrocarbons and heavy metals from stored reclaimed asphalt pavement

2024-4-24

Analysis of the mechanical properties and prediction of damage life for GBFS-HPMC/fibre pervious concrete after seawater erosion

2024-4-18

Experimental and numerical study of conductive heat transfer in aggregate particles using a flighted, rotary drum

2024-4-18

Effects of short-term aging on the mechanical and structural performance of hot mix asphalt mixtures: a case study complemented by statistical analysis

2024-4-15

Effects of aggregate shape on the macrotexture and performance of chip seal: a laboratory study

2024-4-15

Conversions of viscoelastic deflections of asphalt pavement under TSD load to elastic ones for pavement condition assessments

2024-4-10

RMPD-22-12-09.R3 - Improvement in rheological properties of polymer-modified asphalt binder through sulfur addition using traditional and advanced analyses

2024-4-10