Investigation of Gd, Ca and Nd tri-doped ceria for application in solid oxide fuel cells

2024-1-1

Starch consolidation casting of porous alumina and functional gradient porosity development

2024-1-1

Conch-shell-inspired porcelain ceramic tile/Kevlar fabric composites with excellent combination of strength, toughness and shock resistance

2024-1-1

Structure, electrical and optical properties of ZnO and Cu-doped ZnO films prepared by magnetron sputtering at different H2 fluxes

2024-1-1

Sm/Al modified Sn0.94Sb0.06O2 ceramics for NTC thermistors

2024-1-1

Utilizing two-point correlation method for microstructure and mechanical evaluation of silicon nitride ceramics

2024-1-1

A novel approach to investigate oxidation behaviour and mechanical properties of CVD bilayer TiN/TiC coatings

2024-1-1

Influence of the second metal component on processing and selected properties of Al2O3-Cu hybrid composites

2024-1-1

Preparation and properties of novel tungstate SrLa6W10O40: Eu3+ phosphors

2024-1-1

In situ mullite whisker network formation for high strength and lightweight ceramic proppants

2024-1-1

Cu and Er modified barium zirconium titanate (BaZr0.05Ti0.95O3) ceramics: Composition-dependent dielectric properties

2024-1-1

Matoa leaf extract mediated synthesis of Se-doped ZnO nanoparticles and their photocatalytic capability

2024-1-1

Synthesis of TiB2 powders by borothermal and carbothermal reduction of TiO2

2024-1-1

Influence of sintering temperature on structure and mechanical properties of polycrystalline cubic boron nitride composites

2024-1-1

Electrical properties and electromagnetic radiation characteristics of cement/Ba0.06Bi0.47Na0.47TiO3 composites

2024-1-1

Preparation and properties of Eu3+ doped tungstate red phosphor powders

2024-1-1

Graded YSZ/Al2O3 nanocomposite coatings fabricated by electrophoretic deposition of Al and nanosized YSZ particles

2024-1-1

Folding endurance of continuous silicon carbide fibres: A comparative study

2024-1-1

Microstructure, dielectric and ferroelectric properties of CaCu3-xZnxTi4-xCexO12 ceramics prepared via semi-wet route

2024-1-1

Effect of partial substitution of Ta2O5 by ZrO2 on the structure and ionic conductivity of Li2O-Ta2O5-2 SiO2 glass and glass-ceramics

2024-1-1

High-entropy perovskite ceramics: Advances in structure and properties

2024-1-1

The influence of vanadium and titanium oxides in slag on the wetting and corrosion of dense Al2O3 ceramics

2024-1-1

Effects of different processing parameters on structure of Ba1-xSrxTiO3 powders synthesized via nonhydrolytic sol-gel method

2024-1-1

Improving the wear resistance of hydrophobic coating on porcelain by introducing waste porcelain particles

2024-1-1

Low-temperature sintering of Li4SiO4 spheres with high crushing load using mesoporous silica as Si sources

2023-1-1

Viscosity optimisation of photosensitive al2o3 slurry for stereolithography based additive manufacturing

2023-1-1

Low temperature synthesis of NaSICON NaZr2(PO4)3 powders with the assistance of in situ formed mineralizer

2023-1-1

Investigation of the effect of pressure, sintering temperature and time on silicon carbide microstructure

2023-1-1

Finite control of dielectric constant with magnetic field in Sm-doped Ba-Co U-type hexaferrites

2023-1-1

Study on process and parameter optimization of selective laser sintering of SiC composite powder

2023-1-1

Mechanical and electronic properties of NiCo2O4 under high pressure: A first-principles calculation

2023-1-1

Effect of grain growth in bimodal microstructure on cutting performance of self-toughening Dy-α-SiAlON ceramic tool inserts

2023-1-1

Fluorine substituted hydroxyapatite microspheres: Template-free hydrothermal synthesis and sustained fluoride-releasing properties

2023-1-1

Study of phase evolution and dielectric properties of Sr2Mn0.7Sn0.3O4

2023-1-1

Consolidation of alumina toughened zirconia by two-step sintering

2023-1-1

Influence of polymer synthesis route and organic fraction content on structure and porosity of silicon oxycarbide ceramics

2023-1-1

Preparation of silicon carbide ceramic slurry for stereolithography based additive manufacturing

2023-1-1

Double perovskite Nd2FeTiO6 ceramics: Structural and electrical properties

2023-1-1

Improving the steel corrosion resistance of calcium hexaaluminate with addition of M2O5 (M = Nb, Ta)

2023-1-1

Use of cobalt ferrite and activated carbon in supercapacitors

2023-1-1

Review on thermal conductivity of SiCf/SiC composites for nuclear applications

2023-1-1

Epitaxial bilayer La0.7Sr0.3MnO3/Ba0.7Sr0.3TiO3 thin films obtained by polymer assisted deposition

2023-1-1

Reaction sintering in compacted hydrolysed carbonated calcium phosphate

2023-1-1

Fabrication of polycrystalline cubic boron nitride composites under high pressure

2023-1-1

High-temperature oxidation behaviour of si3n4 nanowires with different diameters

2023-1-1

Structure and optical properties of La-doped ZnO thin films at room temperature

2023-1-1

Enhanced green luminescence properties of cu doped ZnO nano-flowers and their improved antibacterial activities

2023-1-1

Production of tib2 coatings on graphite substrates by electrophoretic deposition in NaF-AlF3 melt

2023-1-1

Influence of Er3+ doping on the mechanical and thermophysical properties of (ErxY1-x)3Al5O12 ceramics

2023-1-1

Ablation resistance of C/C-SiCo nanoporous ceramic composites with TaSi2-MoSi2-ZrB2-borosilicate glass coating

2023-1-1