Characterization of High Pressure Water Descaling Jets for Slabs Based on Different Shape Factors

2024-9-18

Casting Production in Poland Versus European Trends in 21st Century

2024-7-22

Effect of Composition and Pouring Temperature of Cu-Sn on Fluidity and Mechanical Properties of Investment Casting

2024-7-22

Kinetic Model for the Decomposition Rate of the Binder in a Foundry Sand Application

2024-7-19

Comparison of the Mechanical Properties of Ductile Cast Iron Intended for Gas Gate Valves with Nickel Cast Iron with an Austenitic Matrix

2024-7-19

Abrasive Wear Resistance of Nodular Cast Iron After Selected Surface Heat and Thermochemical Treatment Processes

2024-7-19

Utilizing Taguchi method and Regression Analysis for Optimizing Sand Mould Flowability

2024-7-18

Research of Hybrid Aluminium Castings with the Use of Porous Cores

2024-7-18

Effect of Addition of Ti on Selected Properties of AlSi5Cu2Mg Alloy

2024-7-18

Influence of the Rate of Cooling/Solidification on the Location of Characteristic Points on the AT and ADT Curves of Cast Iron

2024-6-11

Analysis of Fragmentation Phenomenon of Composite Layers of Fe-TiC Type Obtained “in situ” in Steel Casting

2024-6-11

Study on Mn Volatilization Behavior During Vacuum Melting of High-manganese Steel

2024-6-11

Decarbonization of Production Systems in Foundries

2024-6-11

The Technique of Inorganic Core Sand Shooting with Reduced Pressure in Venting System

2024-6-11

Bio-regeneration for Sodium Silicate Used Sands and its Unattended Monitoring System

2024-6-11

Impact of Aging Time on the Metallurgical Properties and Hardness Characteristics of an Al-Si-Mg-Cr Hypoeutectic Alloy Intended for Automotive Applications

2024-6-11

Study on Preparation Technology and Heat Conduction Mechanism of High-Purity & Ultra-Fine Alumina Powder from Scrap Aluminum Cans

2024-3-26

Evaluation of Permeability Models for Foundry Molds and Cores in Sand Casting Processes

2024-3-19

Characteristics of High-Strength Cast Steel Micro-Alloyed with Vanadium

2024-3-19

Refinement of the Manufacturing Route and Evaluation of the Reinforcement Effect of MAX Phases in Al Alloy Matrix Composite Materials

2024-3-19

The Effect of Carbide Concentration at Grain Boundaries on Thermal Stresses in Castings for Heat Treatment Furnace Tooling

2024-3-19

Research of the New Laboratory Methodology for Measuring the Disintegration of Mixtures with Inorganic Binders Hardened by Dehydration

2024-3-19

Quality Control of Liquid Aluminium Alloy Using Thermal Imaging Camera

2024-3-19

Application of Arc Furnace Flue Ash in Casting Heat Insulation Riser

2024-3-18

Copper Beam Electron Alloying with Ti Powder

2024-3-18

Effect of Swirl Angle on Interaction between Swirl Oxygen Lance Jet and Melt Pool

2024-3-18

Evaluation of High Pressure Die Casting Mold Temperature Relations Depending on the Location of the Tempering Channels

2024-3-18

Study of Susceptibility to Tearing of AlSi5Cu2Mg Alloy with Addition of Zr and Ti

2024-3-18

Image Processing Techniques for Crack Detection in MPI of Springs

2024-3-18

The Use of 3D Printed Sand Molds and Cores in the Castings Production

2024-3-1

Use of Used Graphite Electrodes as Metal Matrix Composites Reinforcement

2024-2-14

Investigation of The Effect of Mechanical Vibration Applied During Solidification on The Microstructure and Properties of Aluminum 356 Alloy

2024-2-14

The Effect of Work Hardening on the Structure and Hardness of Hadfield Steel

2024-2-14

Influence of Melt Properties on the Dendritic Structure of Steel Castings

2024-2-8

Microstructure and Mechanical Properties of the EN AC-AlSi12CuNiMg Alloy and AlSi Composite Reinforced with SiC Particles

2024-2-8

Synthesis and Characterization of Novel Aluminum Composites: A Compo-Casting Approach with ZrO2 , Al2O3 , and SiC

2024-2-8

Corrosion of Pure Magnesium and Binary Magnesium Alloy in Ringer's Solution

2024-2-8

The Analysis of Influence of Compression Forces on the Strength of MM „Stahl 1018” Composite with the use of SolidWorks

2024-2-8

Influence of Cold Work on the Efficiency of Vibratory Machining

2024-2-8

Effect of Matrix Type on Properties of Moulding Sand with Barley Malt

2024-2-8

Calculations of Non-Metallic Particles Removal from Liquid Aluminium to Top Slag

2024-2-8

Usage of the Cast Iron Cylindrical Liner in an Automobile Engine Block

2024-2-8

Research of Casting and Solidification of Steel Ingots by Application of Low-Melting Materials

2024-2-8

Analysis of Influence of Sand Matrix on Properties of Moulding Compounds Made with Furan Resin Intended for 3D Printing

2024-2-8

Exploration and Improvement of Room Temperature Properties for Organosilicon Slag Riser

2024-2-8

The use of Selected Lean Management Tools for Analyzing Defects in Pistons for Internal Combustion Engines

2024-2-8

Properties of Casting Al-Cu Alloy Modified by Mixed Rare Earth (La, Ce) and its Mechanism Analyzed

2024-2-8

Computed Tomography and Scanning Electron Microscopy Analysis of a Friction Stir Welded Al-Cu Joint

2024-1-17

Examination of the Force Parameters in Drawing Process of CuZn39Pb3 Cast Rod using Selected Lubricants

2024-1-16

Comparison of Tensile Properties of Nb Grain Refined A206 Alloy by Gravity and Tilt Casting

2024-1-16