Multi-objective Bayesian optimization of fused filament fabrication parameters for enhanced specific fracture energy in PLA-carbon fiber composites

2024-8-24

Thermo-oxidative crosslinking of carbon fiber reinforced PEEK (Polyetheretherketone) for additive manufactured ceramic matrix composites

2024-8-2

Manufacturing bio-based fiber-reinforced polymer composites: process performance in RTM and VARI processes

2024-7-19

Enhancing the compatibility of low-value multilayer plastic waste in bitumen mixtures using atmospheric cold plasma and thermal oxidation

2024-7-13

Optimization and mechanical response of modular infusion compaction and normalization

2024-7-12

Numerical and experimental investigation of resin flow, heat transfer and cure in a 3D compression resin transfer moulding process using fast curing resin

2024-7-12

Producing ablative thermal protection systems by additive manufacturing

2024-6-26

Investigating the factors influencing the bridging of dry non-crimp fabric on a concave L-shaped mold in an automated draping process

2024-6-21

Structural investigation of solid biopolymer electrolytes: 2-hydroxyethyl cellulose doped ammonium formate as a promising proton conductor

2024-4-8

Fatigue durability test of quasi-isotropic carbon/epoxy laminates in marine environment

2023-1-2

Sensitivity of transverse Liquid Composite Moulding processing predictions to variations in constitutive data

2023-1-2

Effect of reprocessing on the service life properties of glass fiber-reinforced in-house polypropylene waste composites

2023-1-2

Effects of reactive and non-reactive tackifying agents on mechanical neat resin and composite performance for preforming processes and Liquid Resin Infusion (LRI) techniques

2023-1-2

Experimental validation of a new adaptable LCM mold filling software

2023-1-2

Processing properties and pyrolysis behavior of novolak-hexamethylenetetramine mixtures

2023-1-2

Novel test-rig for compaction behaviour analysis of textile reinforcements for improved RTM-process replication

2023-1-2

Investigation of an optimized hot press process design for manufacturing structural polyethersulfone foams

2023-1-2

Residual stress and warpage of additively manufactured SCF/PLA composite parts

2023-1-2

Thickness variation in contoured composite parts by vacuum infusion

2023-1-2

Mitigating void growth in out-of-autoclave prepreg processing using a semi-permeable membrane to maintain resin pressure

2022-10-2

Analysis and development of a brazing method to weld carbon fiber-reinforced poly ether ketone ketone with amorphous PEKK

2022-9-19

In-situ analysis of cocured scarf patch repairs

2022-7-3

Bending properties of structural foams manufactured in a hot press process

2022-5-31

Experimental validation of co-cure process of honeycomb sandwich structures simulation: adhesive fillet shape and bond-line porosity

2022-5-29

Saturated out-of-plane permeability and deformation metrology of textiles at high levels of injection pressure

2022-4-3

Lab-scale experimental analysis of the cyclic compaction-recovery characteristics of uncured thermoset prepreg

2022-4-3

Repair of thermoplastic composites: an overview

2022-4-3

Surface porosity development in tool-side facesheets of honeycomb core sandwich structures during co-cure

2022-4-3

A single three-parameter tilted fibre Bragg grating sensor to monitor the thermosetting composite curing process

2022-1-2

Release properties of plasma polymeric coated polymer films and adhesive strength of transferred polyurethane coatings to fiber-reinforced thermosets

2022-1-2

Study of material homogeneity in the long fiber thermoset injection molding process by image texture analysis

2022-1-2

Prediction of warping in thermoplastic AFP-manufactured laminates through simulation and experimentation

2021-12-16

Ply-by-ply inline thermography inspection for thermoplastic automated tape layup

2021-9-13

Efficient cocured scarf repair of composite structures through rheology modeling

2021-4-3

Quantifying inter- and intra-ply shear in the deformation of uncured composite laminates

2021-4-3

Influence of manufacturing-induced defects on the fatigue performances of autoclave moulded laminates

2021-4-3

Increasing the performance of continuous compression moulding by local pressure adaption

2021-1-2

In situ resin age assessment using dielectric analysis and resin cure map for efficient vacuum infusion

2020-10-1

Optimization of the laser-assisted tape winding process using an inverse kinematic-optical-thermal model

2020-10-1

An investigation of in-situ AFP process parameters using CF/LM-PAEK

2020-10-1

Process robustness and defect formation mechanisms in unidirectional semipreg

2020-10-1

Fast cure of stable semi-pregs via VBO cure

2020-10-1

Towards automation of wind energy rotor blade production: a review of challenges and application examples

2020-10-1

Effective cure cycle development via flow optimization and advanced cure environments

2020-7-2

Permeability of co-cured honeycomb sandwich skins: effect of gas transport during processing

2020-7-2

Experimental and numerical investigations of pressure-controlled resin transfer molding (PC-RTM)

2020-7-2

Path-dependent bond-line evolution in equilibrated core honeycomb sandwich structures

2020-7-2

Use of experimental design to obtain polymeric microfibers with carbon nanotubes

2020-6-25

Determination of convective heat transfer coefficient for automated fiber placement (AFP) for thermoplastic composites using hot gas torch

2020-4-2

Air evacuation and resin impregnation in semi-pregs: effects of feature dimensions

2020-4-2