Effect of incorporating plant-based natural fibres on the mechanical and durability properties of pastes and mortars

2025-1-1

Effect of incorporating plant-based natural fibres on the mechanical and durability properties of pastes and mortars

2024-4-26

Garisenda Tower in Bologna (Italy): structural assessment and numerical simulation

2024-1-1

The detect-ageing prototype building, a benchmark for structural health monitoring of masonry structures

2024-1-1

Experimental test on a pointed arch model monitored by contactless optical system

2024-1-1

Performance of recycled aggregate concrete containing silica fume at elevated temperatures

2024-1-1

The path to sustainable concrete: a unified grading equation for concrete mix design

2024-1-1

Investigation of efficient practices of construction and demolition waste management

2024-1-1

Enhancement of concrete performance by using compound mixture of waste pottery and red brick powders

2024-1-1

Glass panels supported by spider fittings: advantages, challenges, and applications in modern masonry facades

2024-1-1

Early warning system in drinking water purification plants for modelling both residual turbidity and aluminium

2024-1-1

A continuous stress-based form finding approach for compressed membranes

2024-1-1

Structural health monitoring of a masonry arch bridge: modal identification and model updating

2024-1-1

Shrinkage and creep behaviour of thin layered mortared masonry

2024-1-1

Performance of RC deep beams containing eco-friendly waste PET aggregate: experimental investigation

2024-1-1

Soft computing and statistical analysis methods to forecast the uniaxial compressive strength of marl rocks

2024-1-1

Influence of gradation on fresh stabilised adobe mixes

2024-1-1

Assessment of spatial and temporal variations in Qattinah Lake using statistical analysis

2024-1-1

Mechanical properties estimation of historical masonry buildings the Louvre Museum case study

2024-1-1

Structural behaviour of unbonded post-tensioned masonry walls with threaded rods in clay block

2024-1-1

The detect-ageing prototype building, a benchmark for structural health monitoring of masonry structures

2024-1-1

A predictive model for project progress index in EPC projects using data mining techniques

2024-1-1

Development and characterisation of roller compacted concrete by using marble powder: as partial replacement of cement

2024-1-1

Evaluation of the load carrying capacity of cold formed steel stiffened web section

2024-1-1

Damage assessment of Apennine masonry churches severely damaged during the 2016 Central Italy seismic sequence

2024-1-1

Experimental investigation of the horizontal load orientation on masonry corner failure

2024-1-1

FE modelling for the nonlinear dynamics of a historic tower in Central Italy

2024-1-1

Performance evaluation of modified gabion retaining wall

2024-1-1

Effect of chemical additives and recycled aggregate size on the properties of pervious concrete pavement

2024-1-1

Garisenda Tower in Bologna (Italy): health monitoring by different non-destructive testing techniques

2024-1-1

A proposal for the numerical modelling of monotonic and cyclic behaviour of masonry infilled reinforced concrete frames

2024-1-1

Non-destructive testing and historic building information modelling for the structural diagnosis of the church of the society of Jesus in Cusco, Peru

2024-1-1

Experimental and numerical procedure for vulnerability assessment of historical masonry building aggregates

2024-1-1

Predicting compressive strength of recycled aggregate concrete using natural aggregate concrete compressive strength and material proportions

2024-1-1

Numerical model for the cyclic behaviour of a rubble stone masonry wall with opening and reinforcement

2024-1-1

An experimental and analytical study of the effect of mechanical properties of Syrian recycled aggregates on torsional behaviour of RC beams

2024-1-1

A study of the administrative water loss in the drinking water network: a case study in the seventh sector in the city of Damascus

2024-1-1

Characterisation of Superpave recycled asphalt mixtures utilising optimum contents of fatty amine-based asphalt additive

2024-1-1

Prediction of effective strain for near-surface mounted FRP strips in strengthened RC beams using a neuro-fuzzy network

2024-1-1

Risk factors affecting the performance of public works construction projects in developing countries: a case study of Lebanon

2024-1-1

Performance of lime-based coating mortars with aggregate from different industries

2024-1-1

A proposed plan for managing construction waste in Syria

2024-1-1

Improving building energy performance based on building information modelling approach

2024-1-1

Non-contact strain measurement of loading-unloading splitting test on concrete

2024-1-1

Sensitivity to uncertainties in the dynamic response of masonry arches

2024-1-1

Consolidation of historic buildings damaged by settlements with composite materials

2024-1-1

Motion magnification technique for the monitoring of masonry structures

2024-1-1

Numerical assessment of movement joint spacing in masonry veneer walls with high-strength steel bed joint reinforcement

2024-1-1

Effect of waste PET fibre on rheological and mechanical properties of self-compacting concrete

2024-1-1

Physical, mechanical, and bonding properties comparison of lightweight foam concrete brick with burnt clay brick used in masonry

2024-1-1