CIS Iron and Steel Review

2024-7-11

On the problem of processing of manganese wastes from ore beneficiation: preparation of a single-component charge for ferromanganese melting

2024-6-30

Calculation of the maximum functional clearance of a cylindrical joint between a steel shaft and a cast iron sprocket

2024-6-30

Recycling of red mud in iron-containing catalyst for oxidizing organic impurities in waste water

2024-6-30

Review of scientific-applied research and industrial application of radial shear rolling technology

2024-6-30

Detection of optimal parameters of steel sheet billet forming process while bending on PBT 25 three-roller machine

2024-6-30

The method of quantitative assessment of galaxite dissociation degree in the oxide MnO–Al2O3 melt based on the Bjerrum-Guggenheim coefficient concept

2024-6-30

Evaluation of steel grade effects on stress-strain behavior of joint connectors: a finite element approach

2024-6-30

Analysis of the technique for experimental determination of the efficient heat transfer coefficient during drying of iron ore pellets and charge in the dense layer

2024-6-30

Identification and localization of pitting corrosion on metallic surface using deep learning

2024-6-30

Investigation of properties of laminar antiferromagnetic nanostructures

2024-6-30

Experimental study of the process of laser treatment of steel Kh12M

2024-6-30

Mechanism of MgO–C refractories corrosion interacting with CaO–MgO–Al2O3–SiO2–FeO slags

2024-6-30

Smelting of high-carbon ferrochromium from pre-reduced chromite raw materials

2024-6-30

Using of thermal cycling to improve the strength properties of steel

2024-6-30

Investigation and modelling of the microstructure evolution during hot deformation of novel Fe–30Mn–10Al–3Si–1C with an elevated specific strength

2024-6-30

Porosity reduction in metal with hybrid wire and arc additive manufacturing technology (WAAM)

2024-6-30

Viscoplastic properties of chromium-nickel steel in short-term creep under constant stress. Part 1

2024-6-30

Increase of resistance of steel moulds using the complex modifier INSTEEL-7

2024-6-30

Features of finite element modeling for hot rolling process of clad sheets and strips

2023-12-15

The effect of laser hardening on the operation resistance of rolls of multi-roll mills and the quality of the rolling strip

2023-12-15

Experimental examination of the chemical-metallurgical roasting process for iron ore raw materials on the fire grate of a roasting conveyor machine

2023-12-15

Study of the process of oxidizing-sodium roasting of industrial vanadium-containing ferrophosphorus and vanadium slags

2023-12-15

Optimal distribution of capsules with active substance for the crack detection system in a turbine blade body

2023-12-15

Study of phase and structural transformations in overcooled austenite for high-strength cold resistant steel during continuous cooling

2023-12-15

Contrast range examination of rich iron ore from Mikhailovskoe deposit and evaluation of possibility of its preliminary concentration via physical methods

2023-12-15

The role of multi-phase metal content in corrosion and premature failure mitigation of steel equipment in oil refiniers. Part 2

2023-12-15

Managing the properties of cast products made from alloys of various structural classes using nitrided materials

2023-12-15

Experience of putting into practice and development prospects of digital twins in section rolling technological systems

2023-12-15

Comparative review on the technologies of briquetting, sintering, pelletizing and direct use of fines in processing of ore and technogenic materials

2023-12-15

A model of automated mold flux feeding into the crystallizer of a continuous casting machine

2023-12-15

Perspective high-strength pipe steel with increased corrosion cold resistance

2023-12-15

Influence of diffusion alloying of structural steels by nickel and copper in the medium of low-melting liquid-metal solutions on their corrosion resistance

2023-12-15

Study of electrochemical properties of austenitic chromium-nickel steel 12Kh18N10T in concentrated sulfuric acid

2023-12-15

Formation of microscopic internal stresses in rails during long-term operation

2023-12-15

Development of the heat treatment mode for TRIP steel additionally alloyed with aluminium

2023-12-15

Influence of thermal effect on the structure and properties of die steel 70Kh3G2FTR(m)

2023-12-15

Mathematical description of the lines of monovariant phase equilibria on the MnO-SiO2 phase equilibrium diagram

2023-12-15

An approach to calculating the casting temperature of high-manganese austenite steel

2023-12-15

Comparative evaluation of the kinematic parameters at symmetric and asymmetric cold rolling of strip using computer simulation

2023-6-30

Research on the use of coke chemical production resin and its reducing properties to obtain copper powder for cladding lubricant

2023-6-30

Ferrum extraction in cast iron via reduction smelting of red mud

2023-6-30

Parameters of protective carbon films applied on high-speed steels M42 via magnetronic sputtering

2023-6-30

Study of phase transformations during heating of briquetted mono-charge from chromiumcontaining materials and carbon reducing agents

2023-6-30

Smelting of vanadium-containing alloys with using non-standard reducing agents

2023-6-30

Studying microstructure of heat-resistant alloy based on the Fe-Cr-Ni-alloying element system for manufacture of components for metallurgical equipment

2023-6-30

Increase of efficiency of electroflotation extraction of low-soluble manganese compounds from water solutions in presence of flocculants of anion, cation and non-ion types

2023-6-30

Use of machine learning methods for determinatuon of the boundary conditions coefficients in a FEM task for the case of accelerated cooling of hot-rolled sheet metal

2023-6-30

The problems of protection and heat insulation of steel tanks which are used in hydrogen power engineering

2023-6-30

Forming of the structure of binder film in waterglass mixtures depending on the setting method

2023-6-30