Sustainable construction: the use of cork material in the building industry

2024-8-19

Feasibility study on conversion of biowaste of lemon peel into carbon electrode for supercapacitor using ZnCl2 as an activating agent

2024-8-19

Performance of high sulfonated poly(ether ether ketone) improved with microcrystalline cellulose and 2,3-dialdehyde cellulose for proton exchange membranes

2024-8-10

Effect of scandium concentration on the performances of cantilever based AlN unimorph piezoelectric energy harvester with silicon nitride substrate

2024-7-27

Enhanced electrochemical validation of metal organic frameworks-derived TiO2/Fe-TiO2 as an active electrode for supercapacitors

2024-7-24

The photothermal properties of hydrogel nanocomposite embedded with ZnO/CuO based on PVA/GA/activated carbon for solar-driven interfacial evaporation

2024-7-20

Formulation and development of composite materials for thermally driven and storage-integrated cooling technologies: a review

2024-7-15

Novel Nafion nanocomposite membranes embedded with TiO2-decorated MWCNTs for high-temperature/low relative humidity fuel cell systems

2024-6-6

Triboelectric power generation performance of polyvinyl alcohol using ZnO–CuO–AgO trimetallic nanoparticles

2024-5-21

Mesoporous Pdx-Nix aerogels for electrocatalytic evaluation of urea-assisted electrolysis

2024-5-17

Characteristics of rice husk biochar briquettes with municipal solid waste cassava, sweet potato and matooke peelings as binders

2024-5-15

Enhancing the physicochemical properties of nickel cobaltite catalyst for oxygen evolution reaction in anion exchange membrane water electrolyzers

2024-5-14

Numerical investigation of the effect of an air layer on the melting process of phase change materials

2024-5-14

CO2 conversion to synthetic fuels using flow cell reactor over Cu and Ag based cathodes

2024-5-14

Maximizing power generation in single-chamber microbial fuel cells: the role of LiTa0.5Nb0.5O3/g-C3N4 photocatalyst

2024-5-9

Analysis and optimization of lead-free perovskite solar cells: investigating performance and electrical characteristics

2024-4-25

Lithiated Nafion membrane as a single-ion conducting polymer electrolyte in lithium batteries

2024-3-6

Incorporation of multilayered double hydroxides/sepiolite augments proton conductivity performance in low sulfonated polyether sulfone octyl sulfonamide

2024-3-1

CO2 photocatalytic reduction with robust and stable metal–organic framework: a review

2024-3-1

Photoconductivity in self-assembled CuO thin films

2024-2-16

Significant augmentation of proton conductivity in low sulfonated polyether sulfone octyl sulfonamide membranes through the incorporation of hectorite clay

2024-2-16

Desirable candidates for high-performance lead-free organic–inorganic halide perovskite solar cells

2024-2-16

The future of tire energy: a novel one-end cap structure for sustainable energy harvesting

2024-2-16

Influence of the 3D architecture and surface roughness of SiOC anodes on bioelectrochemical system performance: a comparative study of freeze-cast, 3D-printed, and tape-cast materials with uniform composition

2024-2-5

Review of flexible perovskite solar cells for indoor and outdoor applications

2024-1-31

Production and characterization of briquettes from sugarcane bagasse of Wonji Sugar Factory, Oromia, Ethiopia

2024-1-24

Utilizing the lignocellulosic fibers from Pineapple Crown Leaves extract for enhancing TiO2 interfacial bonding in dye-sensitized solar cell photoanodes

2024-1-24

The thermophysical properties of a promising composite adsorbent based on multi-wall carbon nanotubes for heat storage

2024-1-24

Platinum nanoparticles decorated multiwalled carbon nanotube composites as highly transparent, bifacial counter electrodes for dye-sensitized solar cells

2023-11-28

Variability of temperature on the electrical properties of heterostructured CIS/Cds through SCAPS simulation for photovoltaic applications

2023-11-25

Biodiesel production from transesterified yellow grease by ZSM-5 zeolite-supported BaO catalyst: process optimization by Taguchi’s experimental design approach

2023-11-24

Performance evaluation of solar panels under different dust accumulation conditions using thermography: focusing on PV temperature variation

2023-11-23

Dye-sensitized solar cells based on critical raw material-free Fe–N–C counter electrodes

2023-11-17

Green-based modifiable CaZnBr4 for solar cells application

2023-11-17

Selecting an appropriate machine-learning model for perovskite solar cell datasets

2023-9-25

Exploratory study of potential usefulness of cost-effective composites thin films for energy device

2023-9-2

Low-temperature synthesis of doped MnO2–carbon dots nanocomposite: an analysis of nanostructure and electrical properties

2023-8-1

Synthesis and application of biomass-derived magnetic biochar catalyst for simultaneous esterification and trans-esterification of waste cooking oil into biodiesel: modeling and optimization

2023-7-6

A review on recent research on bio-based building materials and their applications

2023-5-10

Alkaline electrolysis using CuOx cathode for the conversion of carbon dioxide into liquid fuels

2023-5-10

N-type H2-doped amorphous silicon layer for solar-cell application

2023-4-12

Modeling and simulation of biomass anaerobic digestion for high biogas yield and CO2 mineralization

2023-4-7

Development of polymer blend electrolytes for battery systems: recent progress, challenges, and future outlook

2023-3-31

Development of thin film coatings with polypyrrole (ppy) by physical plasma deposition technique (PAPVD) for electrochemical capacitor

2023-2-21

First principles study of optical properties of Ni- and Pd-doped TiO2 as visible light catalyst

2023-2-16

Electrodeposited Cobalt–Copper mixed oxides for supercapacitor electrodes and investigation of the Co/Cu ratio on the electrochemical performance

2023-2-9

Biomass stemmed activated carbon electrodes toward a significant electric double-layer capacitor

2023-1-20

Comparative analysis between traditional and emerging technologies: economic and viability evaluation in a real case scenario

2023-1-16

Effect of concentration on the properties of nitrogen-doped zinc oxide thin films grown by electrodeposition

2022-12-26

Investigating the properties of tin-oxide thin film developed by sputtering process for perovskite solar cells

2022-12-22