A Comprehensive Study on the Impact of Direct Electric Curing on the Performance of Molybdenum Tailings in Cementitious Materials

2024-12-1

Exploring mechanical properties and cracking behavior of AC-13 and OGFC-16 aggregate-segregated asphalt mixtures

2024-12-1

Examination of the use of binderless zeolite blend as backfill materials to enhance CO2 adsorption in coal mine working face

2024-12-1

Study on flexural behavior of concrete slabs strengthened with externally prestressed recycled bead wires

2024-12-1

Effect of MgO-based expansive agent on strengths, volume stability, and microstructures of C80 SCC in steel tube arch

2024-12-1

Enhancing workability of high-volume calcined clay blend cement pastes through optimized addition sequences of PCE superplasticizer

2024-12-1

High-strength tile production from yellow clay with high silicon dioxide content and its reflection in ultraviolet and visible regions

2024-12-1

Crack-healing and rheological properties of high content fly ash/slag/silica fume green and sustainable cement-based materials incorporating crystalline admixture and calcium alginate biomass hydrogel

2024-12-1

Enhancing sustainability of amorphous-wollastonitic hydraulic binders through incorporation of supplementary cementitious materials

2024-12-1

Self-healing behaviour of fly ash/slag-based engineered geopolymer composites under external alkaline environments

2024-12-1

Enhancing the performance of alkali-activated slag using KH-550 as a multi-functional admixture

2024-12-1

Experimental investigation and analysis of the impact of salinity erosion on the strength of graphene oxide cement soil

2024-12-1

Impact of light mica on the intensity of the alkali-silica reactions in cement concrete pavements containing cataclased granite aggregates

2024-12-1

Compaction and shear performance of lime-modified high moisture content silty clay

2024-12-1

Improvement of shoulder peak effect in graphene/silicone rubber strain sensors by nanosilica

2024-12-1

Carbon footprint as an environmental indicator for wood flooring industry in China

2024-12-1

Life cycle assessment of carbon emissions for cross-sea tunnel: A case study of Shenzhen-Zhongshan Bridge and Tunnel in China

2024-12-1

Rheological and microscopic characterization and correlation analysis of asphalt under high-intensity ultraviolet radiation

2024-12-1

Temporal effects on the micro- and nano-structural cement-slag pastes subjected to microwave curing over 7 years

2024-12-1

Synergistic effect of particle size, carboxymethyl starch and Na2CO3 on rheological and filtration property of bentonite-based material

2024-12-1

Influence of steel slag powder on the early expansion behavior of geopolymers

2024-12-1

Reactive molecular dynamics simulations of the initial oxidation and passivation of Fe-Cr alloy steel

2024-12-1

Prediction of concrete compressive strength using support vector machine regression and non-destructive testing

2024-12-1

The development of a fly ash-based geopolymer for extrusion-based 3D printing, along with a printability prediction method

2024-12-1

Behavior of one-way steel, BFRP, and GFRP reinforced concrete slabs under monotonic and cyclic loadings: Experiments and analyses

2024-12-1

Neighborhood component analysis-based feature selection in machine learning to predict tendon ultimate stress of unbonded prestressed concrete beams

2024-12-1

Shear performance of single embedded nut bolted shear connectors in precast steel–UHPC composite beams under combined tension-shear loads

2024-12-1

New insight on the thermal impact on cementitious materials due to high-temperature with water supply: Continuous expansive spalling in water

2024-12-1

Analysis of the self-healing mechanism of TB compound-modified asphalt based on molecular dynamics

2024-12-1

Preparation of coal gangue foam concrete modified by nanomaterials: Physical properties, pore structure, and electromagnetic properties

2024-12-1

Viability of using recycled powder from CDW to produce ternary cement type LC3

2024-12-1

Detection of uniformity and spatial correlation of subgrade compaction quality based on intelligent compaction technology

2024-12-1

Investigation of long-term degradation of the interface in the anchorage zone of GFRP-RC beams

2024-12-1

Axial Behavior of UHPC Columns with New Emerging Mixtures and Varying Confinement

2024-12-1

Study on cohesion and adhesion behaviors of the zeolite foamed asphalt-warm mix mixture based on molecular dynamics simulation

2024-12-1

Compressive performance and damage mechanism of concrete short columns confined by steel wires reinforced 3DPM

2024-12-1

A three-phase model based on boundary element method for simulation of chloride diffusion in concrete

2024-12-1

Study on fatigue parameters of high modulus asphalt pavement

2024-12-1

Investigation of the fractionalized polyethylene terephthalate (PET) on the properties of stone mastic asphalt (SMA) mixture as aggregate replacement

2024-12-1

Assessment of the engineering properties of concrete prepared with aggregates developed from waste basalt mud

2024-12-1

Durability of geopolymer cementitious materials synergistically stimulated by Ca2+ and Na+

2024-12-1

Improvement of mechanical behavior of cemented soil reinforced with waste sisal fibers: An optimal selection and modification research

2024-12-1

Effects of elevated temperature on mechanical properties and microstructures of alkali-activated mortar made from low calcium fly ash-calcium carbide residue mixture

2024-12-1

Evaluation of degree of blending and interaction between aged and virgin asphalt binders using rheological and fracture measurements

2024-12-1

Preparation and properties of nickel-iron slag-based magnesium chloride cement

2024-12-1

Influence of the ribbed steel core on the inner interface mechanical behavior of the ESDCM pile

2024-12-1

Benzimidazole-connected microporous conjugated polymers bolstered by dendritic fibrous nanosilica as a significant additive in the context of ultra-high-performance concrete

2024-12-1

Mechanics and microstructure analysis of geopolymer utilizing ilmenite tailing and metakaolin powder as alkali-activated materials

2024-12-1

Characterization of historic mortars and the effect of rice husk ash (RHA) on quicklime

2024-12-1

Effects of heavy metal sludge sintered and ground powder on properties of modified magnesium oxysulfate (MMOS) cementitious materials

2024-12-1