Investigation of fracture-plugging wellbore strengthening: Large scale true tri-axial experiments and field tests

2024-9-1

Exploring different FEM strategies for hydro-mechanical coupled gas injection simulation in clay materials

2024-9-1

Quantitative Assessment of Well Leakage, Part I: Cement Stress Evolution

2024-9-1

Characterization of low-frequency distributed acoustic sensing signals in hydraulic fracturing stimulation – A coupled flow-geomechanical simulation approach

2024-9-1

Study on energy consumption and failure mechanism of water-saturated coal sample during impact cracking

2024-9-1

Predicting the Representative Elementary Volume by determining the evolution law of the convergence cone

2024-9-1

Small-scale physical modelling of vertically loaded, cyclically thermally-activated helical piles

2024-9-1

Grain-based distinct element modeling of thermally induced slip of critically stressed rock fracture

2024-9-1

Numerical investigation of the thermal hydrofracturing behavior of the Callovo-Oxfordian claystone

2024-9-1

A complete experimental study on hard granites: microstructural characterization, mechanical response, and failure criterion

2024-9-1

Influence of convection on the thermal storage performance of energy tunnels

2024-9-1

Multi-scale constitutive modeling of the brittle–ductile transition behavior of rocks with microcracks and two populations of pores

2024-9-1

Effects of supercritical CO2 based fluids imbibition on the mechanical properties of shale: An experimental study at high-temperature and high-pressure condition

2024-8-9

Synthesis of results for Brine Availability Test in Salt (BATS) DECOVALEX-2023 Task E

2024-8-4

Thermo-mechanical behavior of an energy retaining pile for geothermal extraction

2024-8-1

Utilizing High-Resolution 3D Voronoi Meshing to Analyze Field Data from the Brine Availability Test in Salt (BATS)

2024-8-1

Analysis of thermally-induced fracture of Callovo-Oxfordian claystone: from lab tests to field scale

2024-8-1

Offshore Geotechnical Challenges of the Energy Transition

2024-8-1

An assessment of the salt caprock creep impact on Pre-salt reservoir geomechanics

2024-8-1

Experimental and numerical analysis of injection-induced permeability changes in pre-existing fractures

2024-7-20

Analytical solution for transient radial interaction between energy piles and soils: Thermo-elastic cavity expansion analysis

2024-7-3

Numerical assessment of the time-dependent behaviour of a tunnel with a yielding support system for a potential repository in claystone

2024-7-1

Value of abstraction in performance assessment – When is a higher level of detail necessary?

2024-7-1

A methodology for incorporating thermal interference in the design of thermo-active pile groups

2024-6-28

Improving the thermal-mechanical performance of bio-treated backfill materials by addition of magnetic iron oxide nanoparticles (nano-Fe3O4)

2024-6-22

Ice-Unfrozen Water on Montmorillonite Surface: a Molecular Dynamics Study

2024-6-6

Insights of using control theory for minimizing induced seismicity in underground reservoirs

2024-6-6

TEMPORARY REMOVAL: Cyclic swell shrink behaviour of lime and lignosulphonate amended expansive soil—An experimental quantification and comparison

2024-6-1

A micro-mechanical insight into the thermo-mechanical behaviour of clays

2024-6-1

Thermo-hydraulic analysis of desiccation cracked soil strata considering ground temperature and moisture dynamics under the influence of soil-atmosphere interactions

2024-6-1

Performance of complex energy geostructures

2024-6-1

A Thermoplastic Clay Constitutive Model with Temperature Dependent Evolution of Stress Anisotropy

2024-6-1

Multi-mode flow simulation of fracture-cavity reservoirs and predicting oil accumulation based on hydro-mechanical-damage coupling model

2024-6-1

Insights from an extensive triaxial testing campaign on a shale for comparative site characterization of a deep geological repository

2024-6-1

The impact of soil layering and groundwater flow on energy pile thermal performance

2024-6-1

Modelling a gas injection experiment incorporating embedded fractures and heterogeneous material properties

2024-6-1

Effect of thermal cycling on the isotropic consolidation and triaxial shear behavior of lateritic clay

2024-6-1

Engineering soil barriers to minimise annual shrinkage/swelling in plastic clays

2024-6-1

Creep properties and model of fractured sandstone under freezing environment

2024-6-1

Investigation and Analysis of the Macro- and Micro-Responses of Bentonite-Sand Mixtures to Temperature

2024-6-1

Assessment of mechanical behavior and failure criteria under varied confining pressures in treated calcareous sand

2024-6-1

In memoriam of Patrick Selvadurai

2024-6-1

Numerical modeling of the fracturing mechanisms of unconsolidated sand reservoirs under water injection

2024-6-1

A resolved CFD-DEM investigation of near-wellbore fine sand migration and production during methane hydrate extraction

2024-6-1

Coupled Multiphase Flow and Viscoelastic Mechanics Modeling of Gas Injection in a Compacted Bentonite Buffer

2024-6-1

Slip-weakening friction controls coseismic displacements in a 3D fracture network: Implications for the long-term safety of nuclear waste repositories

2024-6-1

A three-dimensional elastoplastic constitutive model incorporating Lode angle dependence

2024-5-27

Compaction localization in geomaterials: A mechanically consistent failure criterion

2024-5-11

Flow-geomechanics coupling constrains fault geometry in fluid-induced earthquakes

2024-5-3

A preliminary investigation on the mechanical behaviour of a stiff Italian clay in the context of hydrogen storage

2024-5-1