CFD elucidation of high-pressure subcooled boiling flow towards effects of variable refrigerantproperties using OpenFOAM empirical closures

2024-9-1

Formulating strain-based quadrilateral membrane finite elements with drilling rotations

2024-9-1

Recent advances in nano-modified concrete: Enhancing durability, strength, and sustainability through nano silica (nS) and nano titanium (nT) incorporation

2024-8-10

Stability of fully developed pipe flow of a shear-thinning fluid that approximates the response of viscoplastic fluids

2024-8-1

EQUATIONS OF STATE AND HYSTERESIS LOOPS IN ISOTHERMAL CAVITATION

2024-8-1

Horizontal buoyant jets into viscoplastic ambient fluids

2024-8-1

Rheological modelling for train-track-ground: a review from core concepts to materials and applications

2024-8-1

Dynamic origami solar eyes with tensegrity architecture for energy harvesting Mashrabiyas

2024-8-1

H(div)-conforming and discontinuous Galerkin approach for Herschel-Bulkley flow with density-dependent viscosity and yield stress

2024-8-1

FLEXIBLE STRUCTURES AS A COUNTERMEASURE TO REDUCE LOCAL SCOUR ALONG LONGITUDINAL WALLS

2024-6-1

Analytical solution of the Poiseuille flow of a De Kee viscoplastic fluid

2024-6-1

Improving the Lateral Load Resistance Capacity of Cellular Lightweight Concrete (CLC) Block Masonry Walls Through Ferrocement Overlay

2024-6-1

Crushing resistance on the metal-based plate under impact loading: A systematic study on the indenter radius influence in grounding accident

2024-6-1

Tensile behavior of polycarbonate: key aspects for accurate constitutive modelling and simulation

2024-6-1

Natural convection of viscoplastic fluids in a triangular enclosure

2024-6-1

Numerical analysis is being conducted to investigate the effect of Nano fluids on the melting process of phase change materials (PCMs) in a semi-cylindrical container.

2024-6-1

Advances of Natural Fibers Composites in Diverse Engineering Applications – A Review

2024-5-31

Expansion of a mechano-chemical plant for remanufacturing waste tires into rubber sheet and profitable wire steel by-products: A quantitative sustainability assessment

2024-3-1

Green functions for four-point boundary value problems with applications to heterogeneous beams

2024-3-1

Bandgap design of fabricated BN/ZnO/Al2O3/TiO2 doped graphene using XPS approach

2024-3-1

Multi-Scale Analysis of Corrosion-Induced Fracture Failure Mechanisms of High-Strength Steel Wire

2024-3-1

Derivation of a 2D PCCU-AENO method for nonconservative problems. Theory, Method and theoretical arguments

2024-3-1

Investigation of dissipation phenomenon of non-Newtonian nanofluid due to a horizontal stretching rough sheet through a Darcy porous medium

2024-3-1

Sensitivity of granular pile dimension parameters to deformation response of soft ground under building load

2024-3-1

Mechanical response of tensegrity-origami solar modules

2024-3-1

Shear capacity evaluation of studs in steel-high strength concrete composite structures

2024-3-1

A phase field method of crack nucleation investigation for experimental validation by using the improved degradation functions and strain orthogonal decompositions

2024-3-1

Climatic consequences of the process of saturation of radiation absorption in gases

2024-3-1

Tribological behavior of firm kaolin against smooth rigid wall during extrusion process

2024-3-1

Study on response patterns and influencing factors of buried pipelines with corrosion defects under fault action

2024-2-1

The birth of a volcano: A nonlinear convective model for rock melting at the asthenosphere—Lithosphere boundary

2024-2-1

Structural Behaviour of Reinforced Concrete Beams Containing Recycled Polyethylene Terephthalate and Sugarcane Bagasse Ash

2024-2-1

Investigation of dissipation phenomenon of non-Newtonian nanofluid due to a horizontal stretching rough sheet through a Darcy porous medium

2023-12-16

Climatic consequences of the process of saturation of radiation absorption in gases

2023-12-12

Sensitivity of granular pile dimension parameters to deformation response of soft ground under building load

2023-12-11

A novel approach for study of straightness in commercially produced round metal bars based on deflection measurements

2023-12-1

A methodology using a non-increasing sequence applied in the solution of heat transfer problems

2023-12-1

Exploring the potential of tesla valve for filtering and sorting microscale active swimmers: A computational study

2023-12-1

A note on the response of elastic bodies whose material moduli depend on the density and the mechanical pressure

2023-12-1

Complexities for adopting 3D laser scanners in the AEC industry: Structural equation modeling

2023-12-1

Engineering properties and mechanical behaviour of problematic soil stabilized by bituminous oil shale ash

2023-12-1

A general approach to the mechanical analysis of continuous local inhomogeneity using continuum mechanics theory and a new general energy-based-model

2023-12-1

Ground stability of ellipsoidal cavity due to pipeline defects

2023-12-1

A new class of Finitely Extensible Nonlinear Elastic (FENE-P) models obtained with a thermodynamical approach and the use of compressible natural configurations. Part II: Decoupled thermo-mechanical deformations

2023-10-20

Experimental determination of the recovery factor on cylindrically flow-around temperature sensors Part 1: Determination of the recovery factor for different Reynolds- and Mach-Numbers

2023-10-18

Review on the mechanism and mitigation of cracks in concrete

2023-10-6

Res-Net-VGG19: Improved tumor segmentation using MR images based on Res-Net architecture and efficient VGG gliomas grading

2023-10-5

Experimental evaluation of axial compression performance of precast panels from bamboo-reinforced concrete

2023-10-5

Fatigue life prognosis of an oil well drill string using cascaded dynamic models

2023-9-1

Avoiding localization instabilities in rotary pleating

2023-9-1