Solution combustion synthesis of CaZrO3 ceramic perovskite using different fuels: in-situ FT-IR studies and monitoring of the flame reaction by thermocouple.

2024-9-1

Enhancing the cyan light emission of Ba9Lu2Si6O24:Ce phosphors by crystal-site engineering for full spectrum lighting

2024-9-1

Bimodal Grain Sized Barium Titanate Dielectrics Enabled Under the Cold Sintering Process

2024-9-1

Electrochemical responses and surface degradation analyses alumina and feldspar dental materials in acidic environments: A comprehensive in vitro study

2024-9-1

Mullite effect on the ceramic filters effectiveness in the removal of arsenic from borehole water from Burkina Faso

2024-9-1

Effect of sugarcane bagasse ash addition and curing temperature on the mechanical properties and microstructure of fly ash-based geopolymer concrete

2024-9-1

Electrochemical and structural properties of binder-free iron-based bifunctional catalyst for aqueous Zinc-Oxygen batteries.

2024-9-1

Formation of Magnetite within the Droplet Phase of Immiscible Glass

2024-9-1

The reactivity of α-tricalcium phosphate powders is affected by minute amounts of β-calcium pyrophosphate and by the synthesis temperature

2024-9-1

Performance of Mg stabilised Na-β’’-alumina solid electrolytes prepared by direct ink writing

2024-9-1

Structure property relations in hot pressed 4.4 mol% calcia stabilized zirconia

2024-9-1

Innovative assessment of reactivity in fly ash: the role of particle size distribution characteristics

2024-9-1

Synthesis of B-site high-entropy BaTi0.2Hf0.2Zr0.2Y0.2Nb0.2O3 with water sensing properties

2024-9-1

Digital light processing of rare earth oxide doped natural color zirconia denture for customized aesthetic properties

2024-9-1

Additive manufacturing of alumina refractories by binder jetting

2024-9-1

Ceramic fused filament fabrication (CF3) of alumina: Influence of powder particle morphology on processing and microstructure

2024-9-1

Controlling surface chemistry in cold sintering to advance battery materials

2024-9-1

Residues from beneficiation of granite in porcelain stoneware: Effects on technological properties

2024-9-1

Influence of diamond grinding process on material removal mechanisms and surface roughness of 0/90° continuous carbon fiber reinforced ZrB2

2024-9-1

Ceramics as a key to solving global challenges

2024-9-1

Editorial Board

2024-9-1

Elaboration of Yttrium Aluminum Garnet (YAG) nanopowders and ceramics: comparison between batch and plug-flow reactor.

2024-9-1

Polymer-derived coatings with La2Zr2O7 and glass fillers: preparation and characterisation

2024-9-1

THE OXIDATION-RESISTANT Mo30Si60B10 COATING FOR PROTECTION OF THE T2 PHASE-BASED MOLYBDENUM ALLOY

2024-9-1

Spark plasma sintering of silicon(oxy-)nitride/boron nitride composites and their subsequent thermo-physical properties

2024-9-1

CHARACTERIZATION OF HYBRID SILICATE MATERIALS BASED ON CERAMIC GLAZES AND WASTE LONDON UNDERGROUND DUST

2024-9-1

Ceramic additive manufacturing and microstructural analysis of tricalcium phosphate implants using X-ray microcomputed tomography

2024-9-1

Innovative ceramic pigments from recycled lithium-ion battery cathodes for inkjet applications

2024-9-1

Assessment of geometrical variability in 3D printed ZrO2: Effects of printing and thermal post-processing

2024-9-1

A comparative assessment of thermal conductivity of functionally graded and equivalent non-graded ZrB2–B4C–SiC–LaB6 ultra-high-temperature ceramic composites

2024-9-1

Transparent Tb2Ti2O7 ceramics for use in Faraday isolators

2024-9-1

Reused green glass for the production of low-density ceramic proppants

2024-8-16

Thermal cycling damage of silica refractories for high-temperature thermal energy storage (HT-TES) – can it be healed?

2024-8-13

Rapid densification of nanocrystalline zirconia: Pressureless versus pressure-assisted spark plasma sintering

2024-8-10

Linear volumetric additive manufacturing of zirconia from a transparent photopolymerizable ceramic slurry via Xolography

2024-8-10

Effect of increased intra-bundle spacing on mechanical behaviour of Cf- ZrB2–SiC ultra-high temperature ceramic matrix composites produced by slurry infiltration and hot pressing

2024-8-9

Preparation and characterization of YAG microspheres doped with Eu2+/Eu3+ for broad band emission

2024-8-8

Influence of layer thickness and exposure on mechanical properties of additively manufactured polymer-derived SiOC ceramics

2024-8-3

Improving Properties of Boron Carbide (B4C) with Silicon Doping and Titanium Diboride Addition

2024-8-1

Editorial Note:

2024-8-1

Spark plasma sintering of TiC with TiAly as sintering aid: mechanisms and microstructures

2024-8-1

IR-transparent Y2O3 ceramics: effect of zirconia concentration on optical and mechanical properties

2024-8-1

Assessment of the as-sintered surfaces of ceramic components additively manufactured by Vat Photopolymerization (CerAM VPP)

2024-8-1

Investigations on the processing of ceramic materials using Fused Filament Fabrication

2024-7-29

Content of crystalline silica phases in porcelain stoneware

2024-7-29

Solar salt encapsulated into 3D printed activated carbon/alumina supports for thermal energy storage applications

2024-7-26

Synthesis and characterization of hierarchical Ti3C2Tx MXene/graphitic-carbon nitride/activated carbon@luffa sponge composite for enhanced water desalination

2024-7-20

Sustainable valorization of mining waste: Phosphate sludge repurposing for advanced ceramic production

2024-7-16

Compositional effects of Si–Mg–Al composite fillers on the interfacial microstructure and high-temperature strength of SiC/SiC brazed joints

2024-7-14

Predicting Hardness of Graphene-added Si3N4 using Machine Learning: A Data-Driven Approach

2024-7-5